

#                 'Messages' file for Rhapsody 1.20
#                 ---------------------------------

#                        16 March 1991
   

# Menus
# -----

# Do not alter the following symbols
#
#    *  (means writable)
#    :  (means dotted line follows)
#    !  (means indirected)

menu1:Rhapsody,Info,Open score,!Discard score,MIDI thru,Quit
menu2:Open,*<blank>,*<blank>,*<blank>,*<blank>,*<blank>
menu3:Rhapsody,!Score,!Stave,:Block,Goto,!Play from,:Options,Capture,:Transcribe,Display,Show panels
menu4:Score,Save,Save-MIDI,:Headings,Transpose,Copy,Clear,:Discard,Format,ScoreDraw
menu5:Stave,Add,:Reassign,Transpose,Copy,Clear,:Delete,Format
menu6:Block,Re-tail,Shift,Copy,Clear,Delete
menu7:Goto,Start,Cursor,End,*1
menu8:Play from,Start,Cursor,This bar,*1
menu9:Options,MIDI,Speaker,Scroll,Beat,:Repeats,Very slow,Slow,Normal,Fast,Very fast,*100
menu10:Display,Tiny,Small,Normal,Large,:Huge,Beams
menu11:Rhapsody,Remove bar,Add bar,:Start again,Print
menu12:Re-tail,Up,Down,Both
menu13:Discard,!<blank>,!<blank>,!<blank>,!<blank>,!<blank>,All
menu14:Capture,Step time,Real time
menu15:***


# Miscellaneous words
# -------------------

blank:<blank>
untitl:Untitled
score:Score
stave:Stave
mfile:MIDIfile
silent:Silent
quiet:Quiet
normal:Normal
loud:Loud
none:<None>
noninst:None installed
vnoninst:Voice not installed


# Error Messages
# --------------

error:An error of type %0 has occurred (%1).
datatrans:Data transfer abandoned as receiver will not accept it.
noscores:No blank scores available.
nopdriver:Please install a printer driver and reformat the score.
closefw1:Please close the formatted score window before calling up this menu.
closefw2:Please close the formatted score window before editing this score.
files:Rhapsody, MIDI or Maestro files only please.
closefw3:Please close the formatted score window before loading a new score.
played:This score is being played.
tmsload:Too many staves. Loading abandoned.
csload:Corrupt score. Loading abandoned.
dragfile:Please drag the file icon into an appropriate window.
toomanyb:Too many bars. Bars beyond %0 may be incorrect.
invalidh:Invalid header.
nostaves:No staves.
invalidc:Invalid chunk length.
invalidm:Invalid Mtrk header.
nomaestro:Not a Maestro file.
onestave:Only one stave left.
noblkc:No block to clear.
noblkd:No block to delete.
nodelete:A block which does not include all the staves cannot be deleted. Use 'Clear' instead.
poscursc:Position the cursor on a barline at the point in the score at which you wish to start capturing.
nomemory:Not enough memory.
noblks:No block to shift.
noblkr:No block to re-tail.
noblkco:No block to copy.
toomanys:Too many staves.
copyst:You cannot copy a stave onto itself.
poscursd:Position the cursor in the destination score.
notenst:Not enough staves in the destination score.
poscursb:When copying a block or stave, please position the cursor on a barline.
copybk:A block cannot be copied onto part of itself.
novoices:Some staves do not have voices installed. These staves will be played with a default voice.
soundch:You have assigned too many sound channels.
toomanyn:Too many notes in a cluster.
n2long:Note too long. Transcription abandoned.
tootall:Stave system is too tall to fit. Use a smaller scale
toolong:Bars are too long to fit. Use a smaller scale.
toolines:Too many lines in the score. The maximum is %0.
notrans:Nothing to transcribe.
capture:Too many bars to capture. The maximum is %0.


# Dialogue messages
# -----------------

cancel:CANCEL
overwrite:Overwrite score
oversc:You are about to overwrite score '%0'.
minutes:This file may take a few minutes to load.
loadmidi:Load MIDI file
clearsc1:You are about to clear score '%0' from the cursor to the end.
clearsc2:You are about to clear the whole of score '%0'.
clearsc:Clear score
discard1:You are about to discard score '%0'.
discard2:You are about to discard all the scores.
discard:Discard score
clearst1:You are about to clear stave '%0' from the cursor to the end.
clearst2:You are about to clear the whole of the stave '%0'.
clearst:Clear stave
deletest1:You are about to delete stave '%0'.
deletest:Delete stave
clearbk1:You are about to clear the marked block in score '%0'.
clearbk:Clear block
deletebk1:You are about to delete the marked block in '%0'.
deletebk:Delete block
unsaved:Unsaved data in %0
quit:Quit Rhapsody


# Help messages
# -------------

hsc:Click SELECT to position the cursor in this score.|MClick MENU to bring up the main Rhapsody menu.|MChoose the menu option 'Show panels' to gain access to the various action icons.

pa0:The INSERT-BEFORE icon.|MWhen you click on this icon the program will attempt to insert your choice to the left of the cursor.
pa1:The INSERT-AT icon.|MWhen you click on this icon the program will attempt to insert your choice at the cursor position.
pa2:The INSERT-AFTER icon.|MWhen you click on this icon the program will attempt to insert your choice to the right of the cursor.
pa3:The DELETE icon.|MWhen you click on this icon the program will attempt to delete what is under the cursor.|MNB to delete a rest, for example, you must choose the rest icon below first.

pa5:This icon contains NOTE symbols.|MClick SELECT or ADJUST to cycle through the options.
pa6:This icon contains REST symbols.|MClick SELECT or ADJUST to cycle through the options.
pa7:This icon contains ACCIDENTAL symbols.|MClick SELECT or ADJUST to cycle through the options.
pa8:This icon contains DOT, TIE and TRIPLET symbols.|MClick SELECT or ADJUST to cycle through the options.
pa9:This icon contains BARLINE symbols.|MClick SELECT or ADJUST to cycle through the options. Note that 'supplementary' barlines can be superimposed upon 'proper' barlines.
pa10:This icon contains ACCENT symbols and TRILLS.|MClick SELECT or ADJUST to cycle through the options.
pa11:This icon contains MISCELLANEOUS symbols.|MClick SELECT or ADJUST to cycle through the options
pa12:This icon contains CLEF symbols.|MClick SELECT or ADJUST to cycle through the options
pa13:This icon contains KEY SIGNATURES.|MClick SELECT or ADJUST to cycle through the options
pa14:This icon contains DYNAMIC MARKINGS.|MClick SELECT or ADJUST to cycle through the options
pa15:This icon contains TIME SIGNATURES.|MClick SELECT or ADJUST to cycle through the options
pa17:This icon contains fixed TEMPO settings which take immediate effect.|MThe numbers are in crotchets per minute. The range is 10-500.
pa18:This icon contains ACCELERANDOS and RITARDANDOS.|MClick SELECT to extend the panel.
pa19:This icon contains fixed VOLUME settings which take immediate effect.|MA value of 100 is a good base. The range is 0-126.
pa20:This icon contains CRESCENDOS and DIMINUENDOS.|MClick SELECT to extend the panel.

pa21:Fill in this field with a short item of TEXT.|MNote that the CENTRE of the text will be aligned with the cursor arrows.
pa23:Click SELECT or ADJUST to increase or decrease the target tempo or volume.
pa26:Click SELECT or ADJUST to increase or decrease the number of (crotchet) beats over which the change in tempo or volume is to take place.
pa29:Click SELECT on this icon to turn the auto-spacing feature ON and OFF.|MWhen auto-spacing is ON, the slot will automatically widen to accomodate all of the text. When it is OFF, the slot width remains unchanged.
pa30:Click SELECT or ADJUST to cycle through the available Archimedes voices.|MChoose '-' for no change.
pa32:Click SELECT or ADJUST to cycle through the 16 MIDI channels.|MChoose '-' for no change.
pa34:Click SELECT or ADJUST to cycle through the 128 MIDI program numbers.|MChoose '-' for no change.

pb0:When you click on this icon, the cursor will move UP ONE STAVE.
pb1:When you click on this icon, the cursor will move DOWN ONE STAVE.
pb2:When you click on this icon, the cursor will move BACK ONE BAR.
pb3:When you click on this icon, the cursor will move FORWARD ONE BAR.
pb4:hen you click on this icon, the cursor will move BACK ONE NOTE.
pb5:When you click on this icon, the cursor will move FORWARD ONE NOTE.
pb6:When you click on this icon, the cursor will move UP ONE LINE.
pb7:When you click on this icon, the cursor will move DOWN ONE LINE.
pb8:When you click on this icon, the cursor will move UP ONE OCTAVE.
pb9:When you click on this icon, the cursor will move DOWN ONE OCTAVE.
pb15:The SWAP-TAILS icon.|MClick SELECT to swap the tail of a complete cluster. Use ADJUST to swap the tail of a single note.
pb16:The FORCE-BEAM icon.|MClick SELECT to force a beam between this note and the next. Use ADJUST to undo this effect.
pb17:The BREAK-BEAM icon.|MClick SELECT to break the beam between this note and the next. Use ADJUST to undo this effect.
pb18:The SLOT-WIDTH icon.|MClick SELECT on this icon to increase the width of the cursor slot. Use ADJUST to decrease it.

hd1:Fill in this field with the title of your score. This title will be printed in double height characters at the top of the score.
hd3:Fill in this field with the name of the movement or any other text which you want printed at the top left of the score.
hd5:Fill in this field with the name of the composer or any other text which you want printed at the top right of the score.

sh0:Click SELECT or ADJUST to increase or decrease the number of lines or spaces by which you want to shift each note.|MPositive values shift up, negative values shift down.

tp0:Click SELECT or ADJUST to increase or decrease the number of semitones by which you want to transpose each note.|MPositive values transpose up, negative values transpose down.

tr0:Click on the various fields in this icon to construct the type of trill that you want. Only the black notes are played. Use the flat and sharp signs to set the upper and lower intervals.
tr12:Click SELECT or ADJUST to increase or decrease the speed of the trill in notes per (crotchet) beat.
tr20:Click SELECT or ADJUST to increase or decrease the length of staccato notes.
tr23:Click SELECT or ADJUST to increase or decrease the length of marcato notes.

st0:Fill in this field with the name of the stave (eg the instrument name).
st1:Click SELECT or ADJUST to increase or decrease the MIDI port number (1-4).|MNote that this facility is only available if suitable hardware is fitted.
st2:Click SELECT or ADJUST to increase or decrease the MIDI channel number assigned to this stave. (range 1-16)
st3:Click SELECT or ADJUST to increase or decrease the MIDI program number which is sent to your MIDI instrument whenever this stave is played. (range 1-128 or '-')
st4:Click SELECT or ADJUST to increase or decrease the interval (in semitones) by which this stave is transposed when played.
st5:Click SELECT or ADJUST to cycle through the available Archimedes voices.
st6:Click SELECT or ADJUST to set the number of Archimedes sound channels allocated to this stave.|MThe maximum is eight, shared between all the staves.
st7:Click SELECT on this icon to set the Archimedes stereo sound position.|MNB this has no effect on the MIDI output.
st9:Click SELECT or ADJUST on this icon to cycle set the overall loudness of this stave.
st10:Click SELECT on this icon to join or unjoin this stave to the one above.
st11:Click SELECT or ADJUST on this icon to set the stave to percussion or normal.|MNB this affects only the screen, not the way the stave is played.
st12:Click SELECT or ADJUST on this icon to set the height of the stave (ie its separation from the one above). The default height is 24, range 0-48.

ts0:Click SELECT on this icon and all notes will be transcribed with their tails UP.
ts1:Click SELECT on this icon and notes will be transcribed with their tails UP OR DOWN according to their position on the stave.
ts2:Click SELECT on this icon and all notes will be transcribed with their tails DOWN.
ts3:Click SELECT on this icon to transcribe to a minimum note length of a DEMI-SEMIQUAVER.
ts4:Click SELECT on this icon to transcribe to a minimum note length of a SEMIQUAVER.
ts5:Click SELECT on this icon to transcribe to a minimum note length of a QUAVER.
ts6:Click SELECT on this icon to determine whether this note is transcribed as a sharp or a flat.|M(Note that this will have no effect if the accidental is already determined by the key signature.)

sv0:Fill in the field below with the desired filename and then drag this icon into the appropriate directory window.
sv1:Fill in this field with the desired filename and then drag the icon above into the appropriate directory window.

fs0:This window shows how your score will look on the printed page.|MClick MENU to open the third Rhapsody menu.

pr0:This icon is for information only
pr3:Click SELECT or ADJUST to increase or decrease the first page number.
pr4:Click SELECT or ADJUST to increase or decrease the last page number.
pr23:Click SELECT on this icon to cause printing to halt after each page.
pr25:Click SELECT or ADJUST to increase or decrease the number of copies required.

fm0:Click SELECT on this icon to select normal (portrait) printing.
fm1:Click SELECT on this icon to select sideways (landscape) printing.
fm3:Click SELECT or ADJUST to increase or decrease the size of the print.|MNB This will almost certainly alter the number of pages.
fm5:Click SELECT to determine whether the score is printed normally or with about 20% lateral compression. Use of this option may enable you to get more notes onto each page.
fm8:Use this icon to write in the space (in mm) at the top of each page.
fm10:Use this icon to write in the space (in mm) at the bottom of each page.
fm12:Use this icon to write in the size of the left hand margin (in mm).
fm14:Use this icon to write in the size of the left hand margin (in mm).

mb1:Click SELECT on this icon to send the beat to the internal speaker.
mb3:Click SELECT on this icon to send the beat to the MIFI system.
mb5:Click SELECT or ADJUST to increase or decrease the MIDI beat channel.
mb7:Click SELECT or ADJUST to increase or decrease the MIDI beat pitch.




