
Read_Me file for Integrex printers.
-----------------------------------

The "Integrex.Coljet132" printer definition file is for use with the 
Integrex Colourjet 132 printer. This definition is unlikely to work with any
other printer, unless the printer provides an Integrex Colourjet 132
emulation mode. ISO Latin 1 text character mappings are provided, using the
unusual selection of top bit set characters available on the Colourjet 132.
Backspace overprinting is not used, as the Colourjet 132 cannot backspace.
The range of fancy text highlights supported is reasonable. There are only
three graphics resolutions, and the highest one (160 by 252 DPI) is unlikely
to be useful since it is very slow and it tends to put too much ink onto the
paper.

Note that you need firmware revision 9.14 or later in your Colourjet 132 or
you may encounter problems with text printing. To check your firmware
revision, switch the printer on while holding down the LF button. Contact
Integrex if you need a firmware upgrade.

The "Integrex.ColJet2000" printer definition file is for use with the
Integrex Colourjet 2000 printer. The range of fancy text highlights is
limited on this printer. The ISO Latin 1 text character mappings are good
since the printer is HP PaintJet compatible and therefore has most of the
Latin 1 character set built in. There are only two graphics resolutions (90
and 180 DPI) but both of them are perfectly usable.

There is a problem with graphics printing on the Colourjet 2000 with
firmware revision 1.02. Sometimes the output on the paper is inverted ie.
black prints as white and vice versa. If this happens, press Escape (to stop
printing) and switch the printer off and back on again. Print your document
again. This time it will probably be printed correctly. To check your
firmware revision, switch the printer on while holding down the LF button.
If you think you need a firmware upgrade you should contact Integrex.

The Colourjet 2000 functions better when driven exclusively as an HP
PaintJet compatible printer. You should check with your dealer or third
party software vendors about availability of software to drive the printer
in this manner.
