# Messages for Printers

VSN:0.34 (01-May-1993)
ID:Printer Manager
NNE:Printers
INU:port is being used by a printer driver
CLM:printer driver
UNT:untyped
TYP:type &%0
PAU:Printer: %0
mm:mm
in:in
OP:Printout

# Help text
ICON0:This is the Printer Manager icon.|MClick SELECT to open the Printer control window.
ICON1:This is the %0 Printer icon.|MClick SELECT to make this the main printer, click ADJUST to open the Queue control window, click SELECT to open the Configuration window, or click ADJUST to open the Connections window. Drag a file here to print it.
SAVE0:Drag this icon to the directory in which you want output to appear.
SAVE1:Click SELECT to change the file name.
SAVE2:Click SELECT to set the file name.
SAVE:This window allows you to specify the output file name.
SHTDWN2:Click SELECT to continue the application instead of quitting.
SHTDWN3:Click SELECT to abandon the print queue and quit the application.
SHTDWN:This window is warning you that there is data in the print queue.|MPlease choose the desired action.
HWQRY2:Click SELECT to print the file as a 1st Word Plus file.
HWQRY3:Click SELECT to cancel printing this file.
HWQRY4:Click SELECT to print the file as plain text.
HWQRY:This window is asking you how you want to print this file.|MPlease choose the desired action.
QUERY2:Click SELECT to leave the printer alone.
QUERY3:Click SELECT to carry out the required action on the printer.
QUERY:This window is warning you that there is data in the print queue for this printer.|MPlease choose the desired action.
QUEUE:This window displays queue information for the active printers.|MDrag SELECT from a file to print it.
CNCT31:This is the name of the printer whose connections are being altered.
CNCT5:Click SELECT to accept the specified settings or close the window to lose them.
CNCT0:Click SELECT to print to the parallel port.
CNCT1:Click SELECT to print to the serial port.
CNCT15:This is the current baud rate.
CNCT8:Click SELECT to get a list of available baud rates.
CNCT17:This is the current number of data bits.
CNCT11:Click SELECT to get a list of available data bit formats.
CNCT18:This is the current parity setting.
CNCT14:Click SELECT to get a list of the parity options.
CNCT19:This is the current number of stop bits.
CNCT16:Click SELECT to get a list of available stop bit formats.
CNCT13a:Click SELECT to enable XON/XOFF protocol.
CNCT13b:Click SELECT to disable XON/XOFF protocol.
CNCT2:Click SELECT to print to an Econet printer.
CNCT25:This is the printer name or station number.|MClick SELECT to change it.
CNCT20:Click SELECT to get a list of known printer servers.
CNCT3:Click SELECT to print to an NFS printer.
CNCT26:This is the NFS server name.|MClick SELECT to change it.
CNCT27:This is the NFS printer name.|MClick SELECT to change it.
CNCT28:This is the NFS user name.|MClick SELECT to change it.
CNCT29:This is the NFS printer options.|MClick SELECT to change it.
CNCT4:Click SELECT to print to a file.
CNCT30:This is the current file name.|MClick SELECT to change it.
CNCT32:Click SELECT to get a save box which makes setting the file name easier.
CNCT:This window allows you to change the connection settings for a printer.
PRCTRL:This window gives you control over how the printers are used.|MClick SELECT to select a printer.|MDrag SELECT from a printer definition file to add a printer.|MDouble-click SELECT to open the Configuration window.
INFO:This window displays information about Printers.
PAPER5:This is the paper size name.|MClick SELECT to change it.
PAPER6:This is the width of the paper.|MClick SELECT to change it.
PAPER7:This is the height of the paper.|MClick SELECT to change it.
PAPER8:This is the graphics top margin.|MClick SELECT to change it.
PAPER9:This is the graphics bottom margin.|MClick SELECT to change it.
PAPER10:This is the graphics left margin.|MClick SELECT to change it.
PAPER11:This is the graphics right margin.|MClick SELECT to change it.
PAPER12:This is the text top margin.|MClick SELECT to change it.
PAPER13:This is the text bottom margin.|MClick SELECT to change it.
PAPER14:This is the text left margin.|MClick SELECT to change it.
PAPER15:This is the text right margin.|MClick SELECT to change it.
PAPER16:This is the text height of the page.|MClick SELECT to change it.
PAPER47:Click SELECT to get a list of available paper sizes.
PAPER23:Click SELECT to set the units to millimetres.
PAPER22:Click SELECT to set the units to inches.
PAPER33:Click SELECT to delete this paper size.
PAPER42:Click SELECT to save this paper size.
PAPER:This window allows you to edit existing paper sizes and create new ones.
HME1-0:Move the pointer right to see information about Printers.
HME1-1:Click SELECT to open the Printer control window.
HME1-2:Click SELECT to open the Queue control window.
HME1-2a:The option is greyed out because there are no active printers.
HME1-3:Click SELECT to edit the paper sizes.
HME1-4:Click SELECT to save your current choices.
HME1-5:Click SELECT to quit Printers.
HME2:Click SELECT to set the baud rate to this choice.
HME3:Click SELECT to set the data format to this choice.
HME4:Click SELECT to set the parity to this choice.
HME5:Click SELECT to set the stop bits format to this choice. The available choices are restricted by the settings of Data bits and Parity.
HME6:Click SELECT to set the printer name to this choice.
HMP1:Click SELECT to edit this paper size.
HMQ1-0:Click SELECT to pause the selected printer (ie, pause it now).
SMQ1-0:The option is greyed out because the printer is already paused or suspended.
HMQ1-1:Click SELECT to suspend the selected printer (ie, pause it when the current file has been printed).
SMQ1-1:The option is greyed out because the printer is already paused or suspended.
HMQ1-2:Click SELECT to resume the selected printer (ie, continue printing).
SMQ1-2:The option is greyed out because the printer is not paused or suspended.
HMQ1-3:Click SELECT to flush the selected printer (ie, remove all queued entries).
HMQ1-4a:Click SELECT to pause the selected entry.
HMQ1-4b:Click SELECT to suspend the selected entry. It will not get printed until you resume it.
SMQ1-4:The option is greyed out because the entry is already paused or suspended.
HMQ1-5:Click SELECT to resume the selected entry.
SMQ1-5:The option is greyed out because the entry is not paused or suspended.
HMQ1-6:Click SELECT to delete the selected entry.
SMQ1-7:The option is greyed out because there isn't a selected entry.
HMC1-0:Click SELECT to configure the selected printer.
SMC1-0:The option is greyed out because you have got more than one printer selected.
HMC1-1:Click SELECT to change the connection on the selected printer.
HMC1-2:Click SELECT to activate the selected printer(s).
SMC1-2:The option is greyed out because there are no selected printers.
HMC1-3:Click SELECT to deactivate the selected printer(s).
HMC1-4:Click SELECT to remove the selected printer(s).
HMC1-5:Click SELECT to select all of the printers.
HMC1-6:Click SELECT to clear the selection of printers.
SMC1-6:The option is greyed out because there isn't a selection of printers.

# connection information
GOT:%0 on %1, %2
GOTa:%0 (%1) on %2, %3
NAME:Name
TYPE:Type
CN:Connection
CN0:none
CN1:parallel
CN2:serial
CN4:econet
CN5:file
CN6:NFS
ST:Status
ACT:Active
INA:Inactive

IC0:None
IC1:Parallel
IC2:Serial
IC4:Econet
IC5:To file
IC6:NFS
IC8:Direct
ICx:Printer %0

# Queue states
QUL:%1 on %2 [%3]
QUA:%0 (%1) on %2 [%3]
QULB:%1 on %2 in background [%3]
QUAB:%0 (%1) on %2 in background [%3]
QU0:Active
QU1:Paused
QU2:Printing
QU3:Suspended
QF1:%z12:%mi %am
QF2:%zdy %m3 %ce%yr
QF3:%0%% of %1
QF4:%0
QT1:Directory
QT2:Application

# Menu text
ME1:#Printers,Info,Configure...,Connection...,Printer control...,Queue control...,Edit paper sizes...,Save choices,Quit
ME2:#Baud rate,19200,9600,7200,4800,3600,2400,1800,1200,600,300,150,134.5,110,75,50
ME3:#Data bits,8 bits,7 bits,6 bits,5 bits
ME4:#Parity,None,Odd,Even,1 on TX,0 on TX
ME5:#Stop bits,1 bit
ME5a:2 bits
ME5c:1.5 bits
ME6:#Printers,Dummy
MQ1:#Queue,Pause printer,Suspend printer,Resume printer,Flush printer#,%0,Resume entry,Delete entry
MQ1a:Pause entry
MQ1b:Suspend entry
MP1:#Paper sizes,Dummy
MC1:#Printers,Configure...,Connection...,Active,Inactive,Remove#,Select all,Clear selection

# Baud rates
BR0:9600
BR1:75
BR2:150
BR3:300
BR4:1200
BR5:2400
BR6:4800
BR7:9600
BR8:19200
BR9:50
BR10:110
BR11:134.5
BR12:600
BR13:1800
BR14:3600
BR15:7200

# Data formats
DA0:8 bits
DA1:7 bits
DA2:6 bits
DA3:5 bits

# Stop bits
SB0:1 bit
SB1a:2 bits
SB1b:1 bit
SB1c:1.5 bits

# Parity
PA0:None
PA1:Odd
PA2:Even
PA3:1 on TX
PA4:0 on TX

# OK errors
OK0:Error at line %0 of '%1': %2
OK1:Unable to read PrData file for printer class %0
OK1a:Unable to read Template file for printer class %0
OK2:Error in %0 PrData file: %1
OK2a:Error in %0 Template file: %1
OK3:end of file reached while scanning template
OK3a:end: does not take any parameters
OK4:no semi-colon in '%0'
OK4a:'%0' defined outside template scope
OK5:'%0' does not contain a recognised boolean type
OK6:'%0' does not contain a recognised record type
OK7:'%0' does not contain a recognised list type
OK7a:'%0' should have a number after it
OK8:cannot find data for template '%0'
OK9:failed to match '%0' against the template
OKA:paper size '%0' cannot be found
OKB:Unable to save choices: %0
OKC:Unsupported configuration variable type for printer '%0'
OKD:Unable to read settings
OKE:Error in settings file: %0
OKG:end of file reached while looking for '%0'
OKH:'%0' does not contain a recognised settings type
OKI:Parallel port in use: %0
OKJ:Serial port in use: %0
OKK:NFS printer server must be specified
OKL:NFS is not loaded
OKM:NFS printer, username or options are badly specified
OKN:Objects to be printed must be dragged to a printer icon or into the queue window
OKO:Error in paper file '%0': end of file reached while looking for '%1'
OKP:Printing paused: %0
OKPa:Printing aborted: %0
OKQ:Unable to delete paper size - it has not been saved first
OKQa:Unable to delete paper size - it is being used by a printer
OKR:You can only delete paper sizes that you have saved yourself
OKS:Don't know how to print directories - entry will be removed from queue
OKT:Don't know how to print applications - entry will be removed from queue
OKU:Can only print from applications when a printer has been selected
OKV:Unable to read settings - incompatible file contents
OKW:A printer must be installed and activated before printing works
OKX:Unable to read file '%0'
OKZ:Printer not installed - corrupt or incompatible printer definition file (%0)
OKZa:unable to find class specification in file
OKZb:class '%0' is not supported
OKZc:couldn't match %0 in file
OKAA:Missing ':' from pointer name '%0'
OKAB:'%0' cannot be found as a template name
OKAC:Printer '%0' does not support text printing
OKAD:Paper sizes must be given a name
OKAE:Paper sizes must have a non-zero height and width
OKAF:Unable to open '%0' for printing - entry will be removed from queue
OKAG:Econet printer server must be specified
OKAH:File name must be specified
OKAI:You cannot change the configuration of a printer that is printing
OKAJ:You cannot change the connection of a printer that is printing
OKAK:Template '%0' not found
OKAL:'%0' is not a Printer Definition file

# Warnings
WA1:Printer '%1' not installed (class '%0' not supported)
WA2:Printer '%0' has some queued printing. Keep it or deactivate it?
WA2a:Deactivate
WA3:Printer '%0' has some queued printing. Keep it or remove it?
WA3a:Remove
WA4:There is some queued printing. Quit or continue application?
WA5:Don't know how to print %0 files; print '%1' as plain or fancy text?
WA6:Error from class %0: %2
WA7:Printer '%0' not installed - incompatible settings file contents
WA8:Printer '%0' not installed - no definition data for it
WA9:Connection for printer '%0' reset to none - %1 connection is not available
WA10:Don't know how to match &%0

# Fatal errors
FA1:No printer configuration files can be found
FA2:Cannot find templates for printer class %0
FA3:Unsupported type for support code for printer class %0
# or module
FA4:Not enough memory to overlay printer support code
FA5:Not enough memory for block of type '%0'
FA6:Internal error: attempt to read an integer from a non-integer block
FA7:Internal error: attempt to read a string from a non-string block
FA8:Internal error: attempt to read a boolean from a non-boolean block
FA9:Internal error: attempt to read a list from a non-list block
FAA:Internal error: don't know how to free block at &%0
FAD:Internal error: '%0' does not evaluate to a number
FAE:Internal error: template '%0' not found
FAF:Internal error: unmatched PrData pointer
FAG:Internal error: couldn't fix pointer %0: %1
FAH:Internal error: '%0' won't fit icon %1
FAI:Not enough memory for %0K more
FAJ:You can't run two copies of Printers at once

# Other error text
ER1:Unexpected error: %0 (%1/%2)
ER2:Warning from %0

#Configuration options
BASLIM:4
#Max no of BASIC support classes
MCLIM:0
#Max no of machine code support classes
WSLIM:32*1024
#Total space required for all support classes (sum of machine
#  code sizes plus max size of BASIC)
