# Messages for StudioSound 1.00
# 1996 Henrik Bjerregaard Pedersen
#

# Errors
# Restriction: The names may not be longer than 160 chars.
MAX8:You cannot open more than 8 projects.
NOROOM:No room.
NOROOM1:Failed to allocate memory for playback, %0Mb needed.
PSFORM:StudioSound cannot read ProSound tracks in this format.
LIBFULL:The library is full.
LOAD1:There appears to be an error in the saved project, so it cannot be loaded.
TRAX:StudioSound can handle a maximum of 32 tracks, and these have all been used.
KEEP:Keep inside the track.
SHORT:The segment is too short.
VIEWFIL:Unable to open a view on the selected file or segment.
OPENFIL:Unable to open the selected file.
REPEAT0:Cannot repeat the selection.
ILLQUAN0:Illegal quantize strength.
TFULL:The track cannot hold any more segments.
SAVE:To save, drag the icon to a directory viewer.
ILLBEAT:Illegal number of beats per second,
WHAT1:An non-fatal internal error has occured. Sorry about that!
TOOLONG:You cannot save this many samples in the selected file format.
CONVERT:StudioSound cannot read this samplefile format; use an appropiate program to convert the samples to one of the supported formats.
PROSOUND0:ProSound could not be found. Please open a directory viewer containing ProSound and then try again.
PROSOUND1:You need ProSound 1.05 or later to use OLE from StudioSound. Contact Oregan Developments for an upgrade.
FORMAT:Unrecognised fileformat or corrupt file.
REPLC:Please specify which segments to replace and what to replace them with.
BADSEGC:Illegal segment control settings.
PLAY3CS:You cannot play selections shorter than 3 centiseconds.


# Queries
# Restriction: The names may not be longer than 160 chars.
DROP:This project has not been saved. Are you sure you want to remove it?
DIE:Some projects have not been saved. Are you sure you want to quit?
REMOVE:Removing this segment will affect some or all projects. Are you sure you want to continue?
PURGE:Purging the undo-buffer cannot be un-done. Are you sure you want to continue?

# Reports


# Misc
UNTITLED:Untitled
TRACK:Track
FXON:Effects on track
ENV0:dB
ENV1:Cross
ENV2:Linear
ENV3:-

MIDITIME0:Start
MIDITIME1:Stop
DEVICE:Device


# Menus
# Restrictions:
# Only the menutext may be edited.
# The total size of the menus may not exceed the length of the original,
#  english version by more than approx. 600 bytes.
#
# The format of a menu string is     <menuitem>,<menuitem>,<menuitem> etc.
# The format of a menuitem is        <menutext>|<switches>
# Switches are
# #<bgcol><fgcol>     colour (as one digit hex values)
# =                   menu item separator (dotted line) follows this item
# ><submenunumber><   the submenunumber is an internal value
# [<dboxname>]        the dbox name is an internal name
# (<len><buffer>)     buffer is an internal buffer name, len is the size
# *                   generate message (&400C0)
# %                   shade entry (may be unshaded by the application)

M1T:StudioSound
M1:Info|[Info],Create...|,Library...|,Choices...|,Quit|

M2T:StudioSound
M2:Project|>3<,Track|>5<*,Selection|>6<,Segment|>10<,Utilities|>8<

M3T:Project
M3:Info|*[PInfo],Save EDL F3|*[Save],Save F3|*[Save2],Duration|*[Dur],Beats...|=,Remove ^Q|

M4T:Frequency
M4:22050 Hz|,32000 Hz|,44100 Hz|,48000 Hz|, |(08IN1)

M5T:Track
M5:Clear track|,Copy track|,Cut track|=,Delete track|,Add track|=,Mixer...|,Move|*[TPos]

M6T:Selection
M6:Select all ^A|,Clear selection ^Z|=,Copy ^C|,Cut ^X|,Silence ^D||,Paste (insert) ^V|,Paste (overwrite) ^O|=,Repeat|*[Rep],Move|*[Move],Quantize|*[Quan]=,Play around ^F11|,Previous|>15<

M7T:Track title
M7: |(08IN1)

M8T:Utilities
M8:Replace...|,Split at cursor ^F3|,Purge undo-buffer|,Tidy (1 ms)|,Remove all flags|,Clock|,MIDI events...|

M9T:StudioSound
M9A:View|,Copy|,Title|*>11<,Edit|*[Lib],Remove||=,Save as default|,Remove unused|
M9B:View|,Copy|,Title|*>11<,Edit in ProSound|,Remove||=,Save as default|,Remove unused|

M10T:Segment
M10:Controls|*[Seg],View...|=,Copy              ^C|,Cut               ^X|,Delete            ^D|,Paste (insert)    ^V|,Paste (overwrite) ^O|=,Repeat|*[Rep],Split|

M11T:Segment title
M11: |(12IN1)

M12T:Format
M12:StudioSound|,SMPTE|,Samples|

M13T:Flag title
M13: |(12IN1)

M14T:Flags
M15T:Selections

M20T:File format
M20:Raw|,Replay|,AudioWorks|,AIFF|,.WAV|,Sun/NeXT|,Armadeus|,Datavox|,Mascom sample|,.VOC|,ProSound|

M21T:Sample format
M21:8 bit linear signed|,8 bit linear unsigned|,8 bit log (VIDC1a)|,8 bit log (u-law)|,8 bit log (a-law)|,12 bit linear signed|,12 bit linear unsigned|,16 bit linear signed|,16 bit linear unsigned|
M21_2:,16 bit linear signed (be)|,16 bit linear unsigned (be)|

M22T:Sample format
M22:8 bit linear signed|,8 bit linear unsigned|,8 bit log (VIDC1a)|,16 bit linear signed|

M23T:Sample format
M23:8 bit linear signed|,8 bit linear unsigned|,8 bit log (VIDC1a)|,8 bit log (u-law)|,12 bit linear signed|,12 bit linear unsigned|,16 bit linear signed|,16 bit linear unsigned|

M24T:Sample format
M24:8 bit linear signed|,16 bit linear signed|

M25T:Sample format
M25:8 bit PCM|,8 bit log (u-law)|,8 bit log (a-law)|,16 bit PCM|

M26T:Sample format
M26:8 bit linear|,8 bit log (u-law)|,16 bit linear|

M27T:Sample format
M27:8 bit linear signed|

M28T:Sample format
M28:8 bit linear signed|,8 bit linear unsigned|,8 bit log (VIDC1a)|,8 bit log (u-law)|,16 bit linear signed|,16 bit linear unsigned|

M29T:Sample format
M29:8 bit log (VIDC1a)|,16 bit linear signed|

M30T:Sample format
M30:8 bit linear signed|,16 bit linear signed|

M31T:Sample format
M31:16 bit linear signed|

M40T:Position
M40:Start|,Stop|,Start of selection|,End of selection|,At cursor|

M41T:Port
M41:A|,B|,C|,D

M42T:Events

M43T:MIDI events
M43:Copy|,Cut|,Paste|,Insert|,Delete|

# Help messages
# IMENU<num><entry>[<subentry1>[<subentry2>[subentry3>]]],
# I<windowname>  or I<windowname><iconno>
# eg. IMENU43B for 2nd entry in M43 ('Cut'), or ICREATE3 for icon 3 in the create window
IICONBAR:This is the StudioSound icon.|MClick SELECT to create a new project.|MClick ADJUST to show the library.
ICREATE:The window lets you create a new project.
ICREATE1/ICREATE2:Click to select the frequency for the project.
ICREATE13/ICREATE14/ICREATE5/ICREATE16:Select initial no. of tracks in the project.
IPROINFO:This window displays information about the project.
IPROJECT:This is the main project window.
ITOOLS:This window contains the tools.
ITRACKS:Track tools.
ITOOLS0:Click to zoom in.
ITOOLS1:Click to zoom out.
ITOOLS13:Click to enable all tracks.
ITOOLS14:Click to disable all tracks.
ITOOLS15:Click to toggle all tracks.
ITRACKS0:Click SELECT to toggle the track on/off.|MClick ADJUST to solo the track.
ITRACKS1:Click/drag SELECT to change the volume of the track.|MClick ADJUST to reset volume and balance.
ITRACKS2:Click/drag SELECT to change the left/right position of the track.
ITRACKS3:Click SELECT/ADJUST to change the height of the track.
ITRACKS4:Click to open the DSP window for the track.
ITIMECODES:This window shows the timecodes.|MClick SELECT to set the cursor, drag SELECT to set selection.|MClick MENU to select timecode format.
