mtPlott:Plotter+
mPlotte:>Info|Parallel,Serial,Network,File,USB|Input|Plotter type,Paper size,Pen settings,Copies,>Save choices,Stop plotting,Quit
mtStatus:Status
mStatus:Ignore
mtInput:Input
mInput:Selection,Directories,Recurse|CAD files,Text files,HPGL files
mtServe:Server name
mtType:Type
mType:HPGL/2,PJL-HPGL/2,Other|Max. buffer,Cr Lf
mtOther:Plotters
mOther:Auto-detect|HP7440 (A4),HP7470 (A4),HP7475 (A3),HP7550 (A3),HP7570 (A1),HP7575 (A1),HP7576 (A0),HP7580 (A1),HP7585 (A0),HP7586 (A0)|Gerber
mtCopie:Copies
mtPaper:Paper size
mPapers:Source|Auto sense|A0,A1,A2,A3,A4,Other|Scale to fit,Border,Page start,Page end,Half size
mtSourc:Source
mSource:Single sheet,Roll feed|Cassette,Manual,Lower tray,Optional tray
mtBorde:Border mm
mtPages:Page start
mtPagee:Page end
mtPense:Pen settings
mPenset:Pen sort,Use pen 1 only,No. of pens,Pen velocity,Pen width,Pen ups|Grey tones,Sprites,Software arcs,Fixed lines,Fill !Fonts,Extd. font,Transparent|Download RGB,Fixed palette,Last pen
mtNoofp:No. of pens
mtSpeed:Speed cm/sec
mtWidth:Pen Width mm
mtPWidth:Width mm
mtFilen:File name
mtSeria:Serial
mSerial:Baud rate,Data format,Output only,No Esc. Seq.,XON / XOFF
mtBaudr:Baud rate
mtDataf:Data format
mDatafo:Bits,Parity,Stop bits
mtBits:Bits
mtParit:Parity
mParity:off,odd,even,1 on TX,0 on TX
mtStopb:Stop bits
mStopbi:1,2 (1.5 if 5 bits parity. 1 if 8 bits no parity)
mtLastpe:Last pen no.
ERR00:Unknown internal error.
ERR01:File too large to import.
ERR02:No room for drawing file.
ERR03:Only CAD and HPGL type files may be plotted.
ERR04:Settings file corrupt. Using default settings.
ERR05:Can't claim the printer port.
ERR06:Can't claim the serial port.
ERR07:Can't claim the USB port USBplotter:
ERR08:USB port set to null: Check that the plotter is connected and turned on, then try again.
ERR09:Can't open output file.
ERR10:Output to file has failed.
ERR11:Plotter not responding.
ERR12:Plotter type not recognised. Please select one of the standard models to emulate and try again.
ERR13:Symbols nested too deep.
ERR14:Invalid file version number.
ERR15:Insufficient memory to plot font.
ERR16:Fill broken in too many pieces.
ERR17:Files of this type must be imported into ProCAD+ before they can be plotted.
NOFILE:File not found '%s'
NOTDIRS:File '%s' is a directory.
PLOTNG:Plotting
PAR:Parallel
SER:Serial
TOFILE:To file
LONGFN:File name is too long
Help00:This is the ProCAD+ Plotter icon.|MClick MENU to prepare the settings for your plotter.|MDrag a CAD or HPGL file on to it to plot.|M
NoFont:Font(s) not found, including %s, using Trinity.Medium
STOP:Plot still in progress. Are you sure you want to stop?
SYMLOOP:Circular Symbol reference detected in symbol "%s"
