# PowerMgr message file. Note that '~' represent a
# leading or trailing space and %%0 & %%1 represents the
# system name.


# Icon Bar menu

Info:Info
ChangePW:Change Password
Quit:Quit/Filing System


# Select FS box

TitleFS:Power-tec Generic FS Manager
SelFS:Select the required Filing System
FS00:Power-tec SCSI/ATAPI
FS01:Power-tec IDEFS
FS02:Power-tec TapeFS
FS03:PowerIDE
FS04:PowerZip
FS05:Power-tec ParIDE
FS06:PowerJaz


# Info box

InfoTitle:About this program
InfoBoxNa:Name:
InfoBoxPu:Purpose:
InfoBoxAu:Author:
InfoBoxVe:Version:
Purpose:Generic FS Support
Advert:.....for Power Users


# Welcome window

RegName:Name
RegComp:Organisation
RegNum:Reg. Number
Hello:Power-tec Power Manager Registration details
TitleReg:Power Manager Installation
Register:Please fill in the two boxes below with your own name and the name of your organisation
SysUser:Alsystems Workshop
BetaTest:You are running in Beta mode! No warranties are now active!


# Main window

TitleBar:Power-tec Generic FS Manager
HelloName:Power-tec Generic FS Manager for the Power-tec %%1 System
SimpleIns:Express install
AdvancedI:Advanced install
OptExpres:Install
OptInfo:%%0 Information
OptPart:Define Partitions
OptForm:Initialise Partitions
OptConf:Configure Computer
OptConv:Partition Conversion
OptFlash:Flash ROM Control
OptData:Misc %%0 Operations


# Password windows

TitleCPW:Change Password
NewPW:Enter new password
CPass1:Enter new password
CPass2:Confirm new password
EnterPW:Enter Password


# Configuration window

TitleConf:Power-tec %%1 Configuration
GenConf:General Settings
Access:Access Rights
DirCache:Directory cache size in KBytes
Buffers:Number of Read-Ahead/Write-After blocks
DefaultDr:Default %%1 drive number
Deffs:Default to %%1
HostID:%%0 host ID
Terminati:Enable active termination
Spindown:Enable global spindown/eject
Drive:Drive
Read:Read
Write:Write
ID:ID
dr00:%%1:0
dr01:%%1:1
dr02:%%1:2
dr03:%%1:3
dr04:%%1:4
dr05:%%1:5
dr06:%%1:6
dr07:%%1:7
ManSel:Permit manual ID selection instead of automatic detection
CDFS:CD-Rom / ATAPI
CDDrives:CDFS drives
CDBuffers:CDFS buffers
CDATAPI:Enable Power-tec ATAPI
CDAATAPI:Enable Acorn ATAPI
Default:Default settings
Config1:Configure
Config2:Configure and reset


# Drive selection window

TitleSel:Power-tec %%1 Drive Selection
Reload:Rescan %%1 bus(s)
SelInfo:Please select a drive by clicking on its graphical icon.
SelSel:Select
SelID:ID
SelType:Type
SelSize:Capacity
SelVendor:Vendor
SelModel:Model
SelWait:Please wait a mo...
Dupl1:Device '
Dupl2:' appears twice in sucession. Is this correct?


# Drive info window

TitleDrv:Power-tec %%0 Drive Information


# Reset window

ResetInfo:This computer is about to reset. If it does not, then please switch off the power, wait a few seconds and then switch the power back on again.


# FS version window

TitleInfo:Power-tec %%0 Information
VersionIn:%%0 Host Adapter Version
VersionMa:Manufacturer
VersionSo:Firmware date
FIn:%%0 Host Adapter Features
FTarget:Supports target mode
FConf:Supports configuration
FLine:Supports reading control line
FReserve:Supports device reservation
FMult:Supports multiple %%0 cards
FBlock:Supports *%%0Block
FEEPROM:Supports additional EEPROM
FDevices:Supports *Devices
FScatter:Supports scatter lists
FMessage:Supports messaging
FReqS:Supports automatic Request Sense
FQueue:Supports command queueing
FBack:Supports background data transfer
FDis:Supports disconnect/reselect


# Partitioning window

TitlePart:Power-tec %%1 Drive Partitioning
SetPartSi:Set Partition Sizes
PartSize:Partition size (MB)
SystemNam:System Name
LowLevel1:Low Level Format
LowLevel:Perform low level format on drive
TapeSize:Medium capacity (Mbytes)
Secsize:Sector size (bytes/sector)
Interleave:Sector interleave
BigPart1:Drive Information
BigPart:Largest size / remaining



# Tape formatting window

PrimTapeN:Medium label
Erase:Perform erasure of medium


# Partition initialisation window

TitleForm:Power-tec %%1 Partition Initialisation
PartDiscN:Set Partition Disc Names
Partition:Partition
Select:Select
DiscName:DiscName
LFAU:LFAU
FormInit:Initialise selected partitions


# FLASH window

TitleFlash:Power-tec %%0 Flash ROM Programming


# FLASH selection window

Pod0:Podule 0
Pod1:Podule 1
Pod2:Podule 2
Pod3:Podule 3
Pod4:PCI 0
Pod5:PCI 1
Pod6:PCI 2
Pod7:PCI 3
Pod8:Network
Modules:Extra Modules
SelPod:Select Podules for programming
FlashProg:Program Flash
FlashGrab:Grab Flash
FlashCancel:Cancel


# Select Operation window

TitleMisc:Power-tec Generic FS Manager
SelMiscOp:Select the required operation
OP00:Drive Information
OP01:Jaz/Zip Write Protect
OP02:Clean FileCore Boot Blocks


# Clean Boot Block text

CleanStart:About to clean FileCore boot blocks on selected drive
CleanConfirm:Are you sure about cleaning (have you backed up your data)
CleanOp:Cleaning RiscOS Boot Blocks
CleanDone:~FileCore boot block(s) have been cleaned on the selected drive.


# Select Iomega window

TitleIomegaWP:Iomega Software Locking
Password:Write protect password
WPLock:Write Protect
WPUnlock:Normal
LockDone:Medium us now write protected
UnlockDone:Medium us now writable
LockFail:Cannot lock medium
UnlockFail:Cannot unlock medium - wrong password?
LockNoPass:Please supply a password


# Internal Iomega text

NotIomega:This operation only works with Zip and Jaz drives.


# Internal drive selection text

SelOp:Searching for drives on all known %%0 bus(es)
SelError1:Cannot operate on this kind of device
SelError2:This drive has too small a capacity to be operated on
NoDevs:No devices found on any %%0 bus
WrProt:The medium is reported as being 'write protected'
WrProt1:The medium is reported as being 'write protected', do you wish to continue?


# Internal configuration text

CheckConf:Configuration will require the resetting of your computer
NoCMOS:Cannot program CMOS RAM - please ensure that any CMOS RAM locking is disabled
BadOrder:Illegal mapping of drives. Drives must be mapped in the order 4-7 then 0-3.
TermInt:Do you have any INTERNAL %%0 devices?
TermExt:Do you have any EXTERNAL %%0 devices?
DefFS:Do you want %%1 to be the default file system?
NoFSSave:Unable to set configuration - is disc write protected?
CDChange:Any changes to the CDFS setup will not take effect until the next reset
EADFSAB:A reset is recommended after configuration is complete


# Internal partition conversion text

OpConv:Searching for partitions. This may take some time.
ConvMsg1:~partition was
ConvMsg2:~partitions were
ConvMsg3:~found on this drive
ConvMsg4:, plus~
ConvMsg5:~additional partition is to be created
ConvMsg6:~additional partitions are to be created
CheckForC:It is recommended that the computer is re-configured
PartError:No valid partition table found on this drive
NoConv:The drive already has Power-tec compatible partitioning information
NoFC:This drive does not seem to contain a valid RISC OS partition
OldMap:This drive contains an old map disc format
NewMapOnly:Partition conversion will only find 'New Map' RISC OS format partitions


# DOS format internal text

DosFmt01:Sector size must be 512 bytes
DosFmt02:LFAU cannot be set to a user defined value - the cluster size is automatically calculated
DosFmt03:Cannot find a suitable cluster size
DosFmt04:DOS partitions must be at least 32Mbytes


# Internal express setup text

CheckExpr:You are about to use the Express Installation feature
ExpFmt:' does not have any recognisable data on it. Should it be partitioned and initialised?


# Internal FLASH programming

MenuFlashTypes:Card Type
MenuFlashROM:Image Name
NoEpMem:Insufficient memory to store Flash ROM image
CheckFlas:The %%0 Flash ROMs are about to be re-programmed (if applicable). This will require the resetting of your computer
CheckGrab:Do you wish to grab copies of the existing %%0 Flash ROMs before re-programming?
CheckFlasE:This podule does not appear to have a pre-programmed Flash ROM
UKFlash:Flash ROM type not known
FVersion:Latest
FLRetry:Retrying
FlashBad:Could not re-program Flash ROM
FlashNo0:No %%0 Flash ROMs were grabbed.
FlashNo1:No %%0 Flash ROMs were programmed.
FlashMsg1:Loading %%0 Flash ROM
FlashMsg2:Erasing %%0 Flash ROM
FlashMsg3:Reprogramming %%0 Flash ROM
FlashMsg4:Verifying %%0 Flash ROM
FlashMsg5:Grabbing %%0 Flash ROM
FlashMsg6:Saving %%0 Flash ROM
FlashMsg7:Loading modules into %%0 Flash ROM
FlashMsg8:No room in FLASH for module~
FlashMsg9:Checking Flash ROM type
Flash00:None
Flash01:Alsystems
Flash02:MCS
Flash03:Cumana
Flash04:
Flash05:
Flash06:
Flash07:


# Internal partition initialisation text

MenuPartName:Format Type
BadName:Bad partition name
CheckForm:All selected partitions will be wiped
FormError:An error occured whilst initialising partition(s) (lack of memory, cannot write to Host FS or HFORM error?)
HFORMError:. Try changing the size of the partition(s)
FormMsg1:Initialising partitions. Partition '
FormMsg2:' being created.
Auto:Auto
TapeOp1:Preparing medium ready for access
TapeOp2:Shutting down drive ready for medium removal
TapeOp3:Rewinding medium to 'Logical Beginning Of Tape'
BadPart:Unable to write partition table to medium


# Internal FS version text

HostNotFo:Not Found
HostNotKn:Not Known
NoDate:No Date


# Internal partitioning text

SectMsg1:Format and partition drive
SectMsg2:Partition drive
SectMsg1t:Erase, partition and initialise medium
SectMsg2t:Partition and initialise medium
SectMsg2Warn1:It is not recommended for removable devices to have multiple partitions
CheckSect:All data on this drive will be deleted
CheckLow:Drive is about to be low-level formatted
SectMsg3:Carrying out a low level format. This may take some time but please ensure the format is allowed to complete. PowerMgr is disabled until format is complete.
SectMsg4:Checking the size of the medium. The size validated so far is~
SectMsg4a:~with a block size of~
SectMsg4b:~bytes.
SectMsg5:The medium in the streamer appears to be void.
CheckInit:Partition map now created. The partitions should now be initialised
SectMsg6:Writing partitioning information to drive.


# Internal FS code text

Device:Device~


# Internal drive info text

DIType:Device type
DIRem:Removable
DIISO:ISO version
DIECMA:ECMA version
DIANSI:ANSI version
DIVendor:Vendor
DIProd:Product
DIRev:Revision
DIBlks:Block size
DIBlkc:Block count
DICyl:Cylinders
DIHd:Heads
DISc:Sectors/track
DIRdrty:Read retry
DIWtrty:Write retry
DIRate:Rotation rate
DIRelAdr:Rel Addr
DIWBus32:Wide 32
DIWBus16:Wide 16
DISync:Sync
DILinked:Linked
DIRSVD:RSVD
DICmdQue:Cmd Queue
DISftRe:Soft Reset
DIOP:Testing raw system/drive speed
DIGeom:Fetching drive geometry
DIPerform:Combined Performance
DITXRate1:
DITXRate2:~blocks
DIST:Speed test
DIUK:---


# Internal main code text

NoHost:No valid Power-tec system found
NoDriver:%%1 is not Power-tec %%0 compatible
QuitType:Do you wish to select an alternative Filing System to work upon instead of exiting altogether?


# Password text

NoCrPW:Could not create password file - is your disc write protected?
BadPW:Wrong password, please try again
NoPW:A valid password must be entered before a password change can be sanctioned
NoPWM:The two copies of the new password do not match
NoID:PowerMgr is not registered for use with this computer!
Unknown:Unknown


# Window library text

MsgFrom:Message from~
Proceed:. Do you wish to proceed?
Duplicate:' can only have one occurrence of itself running at any one time
NotSup:Not supported on this release
WindDump:Text dump of window '
Yes:Yes
No:No
YNNote:(Click OK for yes else click Cancel)



# Help 

HelpMain:Power-tec Help.|M
HelpEnd:Refer to the manual for further information.
hmsimp:Selecting this option allows express installation.
hmadv:Selecting this option allows advanced installation.
hmexp:This will search for all connected drives and automatically set up the system.
hminfo:This will display firmware/hardware capabilities of the system.
hmquit:Exits the utility software.
hmpart:This allows the formatting and partitioning of drives.
hmform:This will lay down the map/boot/root info for extended partitions.
hmconf:This allows the setting of system parameters.
hmconv:This will convert 3rd party drives into Power-tec partitions.
hmflash:This will place new firmware in the systems Flash ROM or copy old firmware to disc.
hmdata:This will display internal drive parameters.
hppass:Enter your password here to gain entry to the utility software.
hcppass1:Enter your new password here.
hcppass2:Re-enter your password here for verification.
hdisc:This is the name of the drive being worked upon.
hfps:This sets whether this partition is to be high level formatted.
hfpn:This gives the disc name of a partition.
hfpl:This is the 'Large File Allocation Unit' of a partition.
hfplu:This increases the 'Large File Allocation Unit' of a partition.
hfpld:This decreases the 'Large File Allocation Unit' of a partition.
hform:This carries out the high level format of selected partitions.
hpsize:This is the size of the main partition on a drive.
hpsizeu:This increases the size of a partition.
hpsized:This decreases the size of a partition.
hplowf:This allows the ability to low level format a drive.
hpsize:This is the medium size when formatting.
hpsizeu:This increases the medium size.
hpsized:This decreases the medium size.
hpdata:This gives the largest partition size possible and the amount of unused drive space.
hpform:This formats the drive.
hpsize1:This is the size of an extended partition.
hpsys:This is the system name of a partition.
hsysinc:This changes the system name of a partition.
hcdirs:This is the size of the directory cache.
hcdiru:This increases the directory cache size.
hcdird:This decreases the directory cache size.
hcbufs:This is the size of the data cache.
hcbufu:This increases the data cache size.
hcbufd:This decreases the data cache size.
hcdefs:This is the default drive number.
hcdefu:This increases the default drive number.
hcdefd:This decreases the default drive number.
hchsts:This is the Host ID.
hchstu:This increases the Host ID.
hchstd:This decreases the Host ID.
hdeffs:This sets the default Filing System system.
hcterm:This enables/disables the active terminators.
hcspin:This enables/disables the drive spinning down on dismount.
hcdeft:This sets the default filing system system.
hcread:This enables/disables read operations on a partition.
hcwrite:This enables/disables write operations on a partition.
hcid:This is the mapped ID of a partition.
hcman:This allows the setting of manual mappings of IDs.
hccddrives:Number of CDROM drives to be mapped.
hccdbuffers:Number of CDFS buffers.
hcatapi:This enables the Power-tec generic ATAPI driver.
hcaatapi:This enables the Acorn CDROM ATAPI driver.
hcgo1:This sets all settings to their defaults.
hcgo2:This configures the system with the above settings.
hcgo3:This configures the system then resets the computer.
hfs00:This selects SCSIFS as the Filing System to worked upon.
hfs01:This selects IDEFS as the Filing System to worked upon.
hfs02:This selects ATAPEFS as the Filing System to worked upon.
hfs03:This selects EADFS as the Filing System to worked upon.
hfs04:This selects ZIPFS as the Filing System to worked upon.
hfs05:This selects ParIDEFS as the Filing System to worked upon.
hfs06:This selects JAZFS as the Filing System to worked upon.
hpodsel:This selects whether a Podule's Flash ROM is to be programmed.
hpodname:This selects the ROM type to be programmed into a Flash ROM.
hpodchg:This changes the ROM type to be programmed into a Flash ROM.
hfilename:This selects the ROM version to be programmed into a Flash ROM.
hfilechg:This changes the ROM version to be programmed into a Flash ROM.
hflprg:This starts the Flash programming sequence.
hflgrb:This grabs Flash images and stores them in a file.
hflcnl:This aborts the Flash programming sequence.
