#  Copyright (C) 2001-2006 artofcode LLC.
#  All Rights Reserved.
#
#  This software is provided AS-IS with no warranty, either express or
#  implied.
#
#  This software is distributed under license and may not be copied, modified
#  or distributed except as expressly authorized under the terms of that
#  license.  Refer to licensing information at http://www.artifex.com/
#  or contact Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134,
#  San Rafael, CA  94903, U.S.A., +1(415)492-9861, for further information.
#
# $Id: Makefile.in 6746 2006-05-15 17:35:26Z giles $
# makefile template for/from the autoconf build.
# Makefile.  Generated from Makefile.in by configure.

# ------------------------------- Options ------------------------------- #

####### The following are the only parts of the file you should need to edit.

# Define the directory for the final executable, and the
# source, generated intermediate file, and object directories
# for the graphics library (GL) and the PostScript/PDF interpreter (PS).

BINDIR=./bin
GLSRCDIR=./src
GLGENDIR=./obj
GLOBJDIR=./obj
PSSRCDIR=./src
PSLIBDIR=./lib
PSGENDIR=./obj
PSOBJDIR=./obj

# Do not edit the next group of lines.

include $(GLSRCDIR)/version.mak
DD=$(GLGENDIR)/
GLD=$(GLGENDIR)/
PSD=$(PSGENDIR)/

# ------ Generic options ------ #

# Define the installation commands and target directories for
# executables and files.  The commands are only relevant to `make install';
# the directories also define the default search path for the
# initialization files (gs_*.ps) and the fonts.

INSTALL = $(GLSRCDIR)/instcopy -c
INSTALL_PROGRAM = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644

prefix = /usr/local
exec_prefix = ${prefix}
bindir = '<Ghostscript$$Dir>/bin'
scriptdir = $(bindir)
libdir = ${exec_prefix}/lib
mandir = ${prefix}/man
man1ext = 1
datadir = '<GhostScript$$Dir>'
gsdir = '<GhostScript$$Dir>'
gsdatadir = $(gsdir)/$(GS_VERSION_MAJOR)_$(GS_VERSION_MINOR)

docdir=$(gsdatadir)/doc
exdir=$(gsdatadir)/examples
GS_DOCDIR=$(docdir)

# Define the default directory/ies for the runtime
# initialization and font files.  Separate multiple directories with a :.

GS_LIB_DEFAULT=$(gsdatadir)/lib:$(gsdatadir)/Resource:$(gsdir)/fonts

# Define the default directory for cached data files
# this must be a single path.

GS_CACHE_DIR='<GhostScript$$ScrapDir>'

# Define whether or not searching for initialization files should always
# look in the current directory first.  This leads to well-known security
# and confusion problems, but users insist on it.
# NOTE: this also affects searching for files named on the command line:
# see the "File searching" section of Use.htm for full details.
# Because of this, setting SEARCH_HERE_FIRST to 0 is not recommended.

SEARCH_HERE_FIRST=0

# Define the name of the interpreter initialization file.
# (There is no reason to change this.)

GS_INIT=gs_init.ps

# Choose generic configuration options.

# -DDEBUG
#	includes debugging features (-Z switch) in the code.
#	  Code runs substantially slower even if no debugging switches
#	  are set.
# -DNOPRIVATE
#	makes private (static) procedures and variables public,
#	  so they are visible to the debugger and profiler.
#	  No execution time or space penalty.

GENOPT=

# Choose capability options.

# -DHAVE_MKSTEMP
#	uses mkstemp instead of mktemp
#		This uses the more secure temporary file creation call
#		Enable this if it is available on your platform.
# -DHAVE_HYPOT
#	use the system hypot() call

CAPOPT=  

# Define the name of the executable file.

GS=gs

# Define the name of a pre-built executable that can be invoked at build
# time.  Currently, this is only needed for compiled fonts.  The usual
# alternatives are:
#   - the standard name of Ghostscript on your system (typically `gs'):
BUILD_TIME_GS=gs
#   - the name of the executable you are building now.  If you choose this
# option, then you must build the executable first without compiled fonts,
# and then again with compiled fonts.
#BUILD_TIME_GS=$(BINDIR)/$(GS) -I$(PSLIBDIR)

# Define the directories for debugging and profiling binaries, relative to
# the standard binaries.

DEBUGRELDIR=../debugobj
PGRELDIR=../pgobj

# Define the directory where the IJG JPEG library sources are stored,
# and the major version of the library that is stored there.
# You may need to change this if the IJG library version changes.
# See jpeg.mak for more information.

JSRCDIR=jpeg
JVERSION=6

# Note: if a shared library is used, it may not contain the
# D_MAX_BLOCKS_IN_MCU patch, and thus may not be able to read
# some older JPEG streams that violate the standard. If the JPEG
# library built from local sources, the patch will be applied.

SHARE_JPEG=0
JPEG_NAME=jpeg

# Define the directory where the PNG library sources are stored,
# and the version of the library that is stored there.
# You may need to change this if the libpng version changes.
# See libpng.mak for more information.

SHARE_LIBPNG=0
PSRCDIR=libpng
LIBPNG_NAME=png

# Define the directory where the zlib sources are stored.
# See zlib.mak for more information.

SHARE_ZLIB=0
ZSRCDIR=zlib
#ZLIB_NAME=gz
ZLIB_NAME=z

# Choose shared or compiled in libjbig2dec and source location
JBIG2_LIB=jbig2dec
SHARE_JBIG2=0
JBIG2SRCDIR=jbig2dec

# uncomment the following to compile in the Luratech ldf_jb2 codec
#JBIG2_LIB=luratech
#SHARE_JBIG2=0
#JBIG2SRCDIR=ldf_jb2
#JBIG2_CFLAGS=-DUSE_LDF_JB2

# Choose the library to use for (JPXDecode support)
# whether to link to an external build or compile in from source
# and source location and configuration flags for compiling in
JPX_LIB=jasper
SHARE_JPX=0
JPXSRCDIR=jasper
JPX_CFLAGS=-DJAS_CONFIGURE

# uncomment the following to compile in the Luratech lwf_jp2 codec
#JPX_LIB=luratech
#SHARE_JPX=0
#JPXSRCDIR=lwf_jp2
#JPX_CFLAGS=-DUSE_LWF_JP2 -DLINUX

# Define the directory where the icclib source are stored.
# See icclib.mak for more information

ICCSRCDIR=icclib

# Define the directory where the ijs source is stored,
# and the process forking method to use for the server.
# See ijs.mak for more information.
 
IJSSRCDIR=ijs
IJSEXECTYPE=unix

# Define how to build the library archives.  (These are not used in any
# standard configuration.)

AR=ar
ARFLAGS=qc
RANLIB=ranlib

# ------ Platform-specific options ------ #

# Define the name of the C compiler.

CC=gcc

# Define the name of the linker for the final link step.
# Normally this is the same as the C compiler.

CCLD=$(CC)

# Define the default gcc flags.
GCFLAGS=  -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -Wcast-qual -Wwrite-strings -fno-builtin -fno-common -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned long long" 

# Define the added flags for standard, debugging, profiling 
# and shared object builds.

CFLAGS_STANDARD= -O2
CFLAGS_DEBUG=-g -O
CFLAGS_PROFILE=-pg  -O2
CFLAGS_SO=-fPIC

# Define the other compilation flags.  Add at most one of the following:
#	-DBSD4_2 for 4.2bsd systems.
#	-DSYSV for System V or DG/UX.
# 	-DSYSV -D__SVR3 for SCO ODT, ISC Unix 2.2 or before,
#	   or any System III Unix, or System V release 3-or-older Unix.
#	-DSVR4 -DSVR4_0 (not -DSYSV) for System V release 4.0.
#	-DSVR4 (not -DSYSV) for System V release 4.2 (or later) and Solaris 2.
# XCFLAGS can be set from the command line.
# We don't include -ansi, because this gets in the way of the platform-
#   specific stuff that <math.h> typically needs; nevertheless, we expect
#   gcc to accept ANSI-style function prototypes and function definitions.
XCFLAGS=

# defines from autoconf; note that we don't use these at present.
ACDEFS=-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DHAVE_DIRENT_H=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_MALLOC_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DHAVE_STRUCT_STAT_ST_BLOCKS=1 -DHAVE_ST_BLOCKS=1 -DTIME_WITH_SYS_TIME=1 -DSIZEOF_UNSIGNED_LONG_INT=4 -DSIZEOF_UNSIGNED_LONG_LONG=8 -DHAVE_UNISTD_H=1 -Dvfork=fork -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=0 -Dmalloc=rpl_malloc -DRETSIGTYPE=void -DHAVE_STAT_EMPTY_STRING_BUG=1 

CFLAGS=$(CFLAGS_STANDARD) $(GCFLAGS) $(XCFLAGS)

# Define platform flags for ld.
# SunOS 4.n may need -Bstatic.
# Solaris 2.6 (and possibly some other versions) with any of the SHARE_
# parameters set to 1 may need
#	-R /usr/local/xxx/lib:/usr/local/lib
# giving the full path names of the shared library directories.
# XLDFLAGS can be set from the command line.
XLDFLAGS=

LDFLAGS= $(XLDFLAGS)

# Define any extra libraries to link into the executable.
# ISC Unix 2.2 wants -linet.
# SCO Unix needs -lsocket if you aren't including the X11 driver.
# SVR4 may need -lnsl.
# Solaris may need -lnsl -lsocket -lposix4.
# (Libraries required by individual drivers are handled automatically.)

EXTRALIBS=

# Define the standard libraries to search at the end of linking.
# Most platforms require -lpthread for the POSIX threads library;
# on FreeBSD, change -lpthread to -lc_r; BSDI and perhaps some others
# include pthreads in libc and don't require any additional library.
# All reasonable platforms require -lm, but Rhapsody and perhaps one or
# two others fold libm into libc and don't require any additional library.

#STDLIBS=-lpthread -lm

# Since the default build is for nosync, don't include pthread lib
STDLIBS=-lm

# Define the include switch(es) for the X11 header files.
# This can be null if handled in some other way (e.g., the files are
# in /usr/include, or the directory is supplied by an environment variable)

XINCLUDE= -I/usr/X11/include

# Define the directory/ies and library names for the X11 library files.
# XLIBDIRS is for ld and should include -L; XLIBDIR is for LD_RUN_PATH
# (dynamic libraries on SVR4) and should not include -L.
# Newer SVR4 systems can use -R in XLIBDIRS rather than setting XLIBDIR.
# Both can be null if these files are in the default linker search path.

# Solaris and other SVR4 systems with dynamic linking probably want
#XLIBDIRS=-L/usr/openwin/lib -R/usr/openwin/lib
# X11R6 (on any platform) may need
#XLIBS=Xt SM ICE Xext X11

# We use the autoconf macro AC_PATH_XTRA which defines X_LIBS with
# the -L (or whatever). It also defines X_PRE_LIBS and X_EXTRA_LIBS 
# all three of which are stripped and slotted into XLIBS below.
# Usually however, all but X_LIBS are empty on modern platforms.
XLIBDIRS= -L/usr/X11/lib
XLIBDIR=
#XLIBS=Xt Xext X11
XLIBS= Xt Xext X11

# Define whether this platform has floating point hardware:
#	FPU_TYPE=2 means floating point is faster than fixed point.
# (This is the case on some RISCs with multiple instruction dispatch.)
#	FPU_TYPE=1 means floating point is at worst only slightly slower
# than fixed point.
#	FPU_TYPE=0 means that floating point may be considerably slower.
#	FPU_TYPE=-1 means that floating point is always much slower than
# fixed point.

FPU_TYPE=0

# Define the .dev module that implements thread and synchronization
# primitives for this platform.

# If POSIX sync primitives are used, also change the STDLIBS to include
# the pthread library.
#SYNC=posync

# Default is No sync primitives since some platforms don't have it (HP-UX)
SYNC=nosync

# ------ Devices and features ------ #

# Choose the language feature(s) to include.  See gs.mak for details.

FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)ttfont.dev $(PSD)epsf.dev $(PSD)jbig2.dev
#$(GLD)pipe.dev $(PSD)fapi.dev $(PSD)jpx.dev $(PSD)dpsnext.dev
#FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev
#FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)rasterop.dev $(GLD)pipe.dev
# The following is strictly for testing.
FEATURE_DEVS_ALL=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)rasterop.dev $(PSD)double.dev $(PSD)trapping.dev $(PSD)stocht.dev $(GLD)pipe.dev $(GLD)romfs.dev $(PSD)jbig2.dev $(PSD)jpx.dev
#FEATURE_DEVS=$(FEATURE_DEVS_ALL)

# The list of resources to be included in the %rom% file system.
# This is in the top makefile since the file descriptors are platform specific
RESOURCE_LIST=Resource/CMap/ Resource/ColorSpace/ Resource/Decoding/ Resource/Fonts/ Resource/Procset/ Resource/IdiomSet/ Resource/CIDFont/

# Choose whether to compile the .ps initialization files into the executable.
# See gs.mak for details.

COMPILE_INITS=0

# Choose whether to store band lists on files or in memory.
# The choices are 'file' or 'memory'.

BAND_LIST_STORAGE=file

# Choose which compression method to use when storing band lists in memory.
# The choices are 'lzw' or 'zlib'.

BAND_LIST_COMPRESSOR=zlib

# Choose the implementation of file I/O: 'stdio', 'fd', or 'both'.
# See gs.mak and sfxfd.c for more details.

FILE_IMPLEMENTATION=stdio

# Choose the implementation of stdio: '' for file I/O and 'c' for callouts
# See gs.mak and ziodevs.c/ziodevsc.c for more details.

STDIO_IMPLEMENTATION=c

# Override the default device.  This is set to 'display' by 
# unix-dll.mak when building a shared object.
DISPLAY_DEV=

# Define the name table capacity size of 2^(16+n).
# Setting this to a non-zero value will slow down the interpreter.

EXTEND_NAMES=0

# Choose the device(s) to include.  See devs.mak for details,
# devs.mak and contrib.mak for the list of available devices.

#DEVICE_DEVS=$(DISPLAY_DEV) $(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev
#DEVICE_DEVS=$(DISPLAY_DEV) $(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev
DEVICE_DEVS=$(DD)spr.dev $(DD)spr1.dev $(DD)spr8m.dev $(DD)sprm.dev $(DD)spr8c.dev
DEVICE_DEVS1=$(DD)bmpmono.dev $(DD)bmpgray.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16.dev $(DD)bmp256.dev $(DD)bmp16m.dev $(DD)bmp32b.dev
DEVICE_DEVS2=#$(DD)gdevjbig2.dev $(DD)gdevjpx.dev #$(DD)rinkj.dev
DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev $(DD)lj5mono.dev $(DD)lj5gray.dev
DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
DEVICE_DEVS5=$(DD)uniprint.dev $(DD)ijs.dev
DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev
DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev $(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev $(DD)tiffgray.dev $(DD)tiff32nc.dev $(DD)tiffsep.dev
DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
#DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev
DEVICE_DEVS13=$(DD)png48.dev $(DD)png16m.dev $(DD)pnggray.dev $(DD)pngmono.dev $(DD)png256.dev $(DD)png16.dev $(DD)pngalpha.dev
DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev
DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)ps2write.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
#DEVICE_DEVS16=$(DD)bbox.dev
DEVICE_DEVS16=$(DD)gdi.dev
DEVICE_DEVS17=
DEVICE_DEVS18=
DEVICE_DEVS19=
DEVICE_DEVS20=$(DD)cljet5.dev $(DD)cljet5c.dev
DEVICE_DEVS21=$(DD)spotcmyk.dev $(DD)devicen.dev $(DD)xcf.dev $(DD)psdcmyk.dev $(DD)psdrgb.dev

# ---------------------------- End of options --------------------------- #

# Define the name of the partial makefile that specifies options --
# used in dependencies.

MAKEFILE=Makefile
TOP_MAKEFILES=$(MAKEFILE) $(GLSRCDIR)/unixhead.mak

# Define the auxiliary program dependency. We don't use this.

AK=

# Define the compilation rules and flags.

CCFLAGS=$(GENOPT) $(CAPOPT) $(CFLAGS)
CC_=$(CC) $(CCFLAGS)
CCAUX=$(CC) $(GCFLAGS)
# These are the specific warnings we have to turn off to compile those
# specific few files that need this.  We may turn off others in the future.
CC_NO_WARN=$(CC_)

# ---------------- End of platform-specific section ---------------- #

include $(GLSRCDIR)/unixhead.mak
include $(GLSRCDIR)/gs.mak
include $(GLSRCDIR)/lib.mak
include $(PSSRCDIR)/int.mak
include $(PSSRCDIR)/cfonts.mak
include $(GLSRCDIR)/jpeg.mak
# zlib.mak must precede libpng.mak
include $(GLSRCDIR)/zlib.mak
include $(GLSRCDIR)/libpng.mak
include $(GLSRCDIR)/jbig2.mak
include $(GLSRCDIR)/jasper.mak
include $(GLSRCDIR)/ldf_jb2.mak
include $(GLSRCDIR)/lwf_jp2.mak
include $(GLSRCDIR)/icclib.mak
include $(GLSRCDIR)/ijs.mak
include $(GLSRCDIR)/devs.mak
include $(GLSRCDIR)/contrib.mak
include $(GLSRCDIR)/unix-aux.mak
include $(GLSRCDIR)/unixlink.mak
include $(GLSRCDIR)/unix-dll.mak
include $(GLSRCDIR)/unix-end.mak
include $(GLSRCDIR)/unixinst.mak

# Clean up after the autotools scripts
# configure.ac and Makefile.in are symlinks from a subdir 
# (created by autogen.sh) and so are safe to remove
distclean : clean config-clean
	-$(RM_) -r $(BINDIR) $(GLOBJDIR) $(PSOBJDIR)
	-$(RM_) -r autom4te.cache
	-$(RM_) config.log config.status
	-$(RM_) Makefile

maintainer-clean : distclean
	-$(RM_) configure.ac
	-$(RM_) configure
	-$(RM_) Makefile.in

check : default
	$(NO_OP)

