# AudioWorks Messages
# These are the essential messages for AudioWorks. See the file "HelpText" for
# the interactive help messages (which are only loaded if help is actually
# needed)

# You can replace these textual messages with alternatives of reasonable
# length, to customise for a particular language or environment.

# Text messages (names, task descriptions, etc) -------------------------
Text.Secs:seconds
Text.Samp:samples
Text.kB:kilobytes
Text.Env:Envelope
Text.Lang:Language
Text.Unn:Unnamed
Text.NoSamp:No sample
Text.Rate:sample rate
Text.Rates:Sample rates
Text.Mono:Mono
Text.Stereo:Stereo
Text.Bits:bit
Text.Sing:%.2f secs
Text.SRate:%d Hz
Text.SRate2:%d Hz (%.2f secs)
Text.Def:None available
Text.Device:Devices
Text.NoSP:There are no samplers present!
Text.ST:Extracted by AudioWorks from the Tracker '%s'
Text.VRM:Extracted from a Voice Module
Text.Sampled:Sampled by AudioWorks on %s

Text.Save:Save %s
Text.Orig1:Originally a %s file
Text.Orig2:Originally an %s file
Text.Import1:Imported from a %s file
Text.Import2:Imported from an %s file
Text.ClipS:Clipboard sample, copied from '%s'

B.OK:OK
B.Cancel:Cancel
B.Discard:Discard
B.Quit:Quit
B.Shut:Shutdown
B.NO:No
B.Keep:Keep

Task.Sam1:Sampling
Task.Sam2:Sampling - Press escape to stop

Task.AmpP:Amplifying by %d%%
Task.AmpM:Scanning for maximum
Task.AmpE:Applying amplitude envelope
Task.Move:Moving centre
Task.MCen:Adjusting centre
Task.ACen:Scanning for average
Task.AddC:Adding %.2f to samples
Task.Echo:Applying echo
Task.HiPF:Applying hi-pass filter
Task.LoPF:Applying lo-pass filter
Task.RamU:Ramping up
Task.RamD:Ramping down
Task.Rsmp:Resampling
Task.RsmE:Applying pitch envelope
Task.Revs:Reversing


# File-type names -------------------------------------------------------
FT.un:raw data (?)
FT.raw:Raw data
FT.ds:AudioWorks
FT.dv:DataVox
FT.ar:Armadeus
FT.mov:ARMovie
FT.st:*Tracker tune
FT.ss:*Tracker sample
FT.ts:Tracker sample
FT.sd:Dig. Symphony
FT.emr:EMR SoundSynth
FT.rm:Rel. Module
FT.voc:Creative Voice
FT.nxt:NeXT/Sun audio
FT.wav:Microsoft WAVE
FT.svx:Amiga IFF 8SVX
FT.vrm:Voice Module
#FT.avr:Audio Vis Rsch

# File load/saving error messages ---------------------------------------
FE.Fail:Sorry, but I'm unable to load that file!
FE.Big:Sorry, but that file is too big to load (it contains more than 4 million samples per channel)
FE.Blank:That file is too small to be a valid or useful sound sample!

Load.Fail:(I will load it as raw data)
FE.Gen:This %s sample is in a new/compressed/corrupt format. The settings I have chosen may be incorrect

FE.AE7:This ARMovie file has no soundtrack!
FE.DigT:Sorry, but I can't load samples from Digital Symphony files.
FE.DigS:This Digital Symphony sample is packed <Load.Fail>

FE.Save:Sorry, I can't save the file (reason: %s)
FE.Load:Sorry, I can't load that file (reason: %s)
FE.Load2:I failed to load the file (corrupt data?) - try loading with CTRL held down
FE.Samp:Unable to use that file (reason: %s)
FE.IsDir:A directory of that name exists - please use a different name
FE.DVOX:DataVox format cannot effectively represent 12 bit samples
FE.Arm:Armadeus format cannot represent 12 bit, 16 bit, or stereo samples
FE.Wav16:Sorry, I can't read WAV files of more than 16 bits per sample
FE.WavPCM:This WAV file does not use 'PCM' format samples - I can't load it
FE.VRM:Voice modules do not support stereo samples


# Dialogue-box and error messages ---------------------------------------
Q.Discard:Are you sure you want to discard it?
D.Save:Changes to '%s' haven't been saved. <Q.Discard>
D.SClp:Changes to the clipboard haven't been saved. <Q.Discard>
D.QuitS:One sample has not been saved. Do you really want to quit?
D.QuitP:%d samples are unsaved. Do you really want to quit?
D.2Sav:To save, drag the file icon to a directory viewer window
D.Load:That file isn't of a type I recognise. Shall I load it anyway?
D.BadS:Those are silly settings. Do you want to try again?
D.Samp:I can't record: You're already recording!
D.StSamp:The sampler is mono - Please use a mono sample
D.OWrite:This sample is unsaved: Really record over it?
D.NoSH:I can't sample: <Text.NoSP>
D.Skip:I couldn't keep up with that sampling rate - try again with 'best quality' on
D.Silc:Are you sure you wish to fill the selected region with silence?
D.Pref:You have changed the preference settings. Do you wish to keep the changes?
D.SPrf:REMEMBER - you must save the preferences and re-run AudioWorks to use this new setting.
D.Alter:You have changed some settings for this sample. Do you want to keep them?

E.M:There is not enough free memory for me to
E.NoMem:<E.M> run correctly (increase wimpslot)
E.LMem:<E.M> load '%s'
E.CMem:<E.M> create this sample!
E.TMem:<E.M> start that operation
E.NMem:<E.TMem> - I'll need about %dkB more
E.BMem:<E.M> load/save this file
E.EnvM:<E.M> edit any more envelopes
E.Clip:<E.M> store the clipboard
E.2Stereo:<E.M> make this sample stereo

E.TLF:I can't read my window templates
E.TOF:<E.TLF> (%s)
E.Winds:Sorry, but AudioWorks can't handle opening any more windows!
E.EMem:Unable to complete that operation (low on free memory?)
E.Samp:You're already editing plenty of samples. Don't be greedy!
E.Task:That sample is already being processed - be patient!
E.Proc:That sample is being processed - be patient!
E.WSamp:You're recording into this sample - simultaneously modifying it is inadvisable!
E.FSamp:Sorry, but AudioWorks does not currently support stereo foreground-only samplers
E.Save:I am unable to save the sample
E.BadT:Either that file isn't a (Pro)Tracker file, or it's corrupt
E.IsCB:You can't use cut/copy/paste on the clipboard!
E.Pref:Unable to write preferences
E.Envs:You can only edit 8 envelopes at once.
E.Xfer:I can't transfer the file - double-click your !System or !Scrap and re-try
E.KeyB:My key bindings file is missing! I'm afraid all hotkeys are unavailable.
E.Gone:This operation will totally delete the original sample! Are you sure?
E.Sampler:Sorry, I can't sample (reason: %s)
E.SampStop:Sampling was aborted part way through (reason: %s)
E.SampleTD:Sorry, I am unable to sample to disc
E.Play:Sorry, I can't play (reason: %s)
E.2Small:Sampling into such a small sample would be unproductive!


# Menu definitions ------------------------------------------------------
MT.Main:AudioWorks
M.Main:>Info|Preferences...,Alter...         F5,Keyboard...      F6,Spectrum...      F7,Oscilloscope...  F8|New sample...,Record To Disc...,Close All       ^C|Quit

M.Wind:File,Edit,Display,Effects,Utilities

MT.File:File
M.File:>Info             ^I

MT.Edit:Edit
M.Edit:Clear             ^Z,Cut               ^X,Copy              ^C,Paste             ^V,Delete            DEL,Crop|Overwrite opts... ^V,Wipe clipboard,Show clipboard|Select all        ^A,Select header

MT.Head:Size (bytes)
M.Head:xxxxxx

MT.Disp:Display
M.Disp:Dots,!Lines,Bars,Outline|Scale View... ^S,Zoom In

MT.Effect:Effects
M.Effect:>Amplify    ^A,>Centre      ^M,>Echo        ^E,Envelope... ^L,>Extend,>Filter      ^F,>Ramp        ^R,>Resample    ^P,>Reverse     ^B,Silence

MT.Utils:Utilities
M.Utils:Alter...   F5|Make Repeat,Select Repeat,Clear Repeat|Link channels,Make Mono,Make Stereo,Swap channels

MT.Samp:Samplers

MT.Speed:Measure in
M.Speed:hertz,kilohertz,s delay,secs playtime,times current
M.Speed2:hertz,kilohertz,s delay

MT.Type:Sample type
M.Type:Logarithmic,Linear Unsigned,Linear Signed,Law Logarithmic

MT.SList:Samples

MT.Bits:Bits/Sample
M.Bits:8,12,16

MT.Env:Envelopes
M.Env:New Envelope,Delete Envelope,>Save Envelope

# Alter window speed settings -------------------------------------------
Alter.S1:hertz
Alter.S2:kilohertz
Alter.S3:s delay
Alter.S4:secs playtime
Alter.S5:times current

# Sample format names ---------------------------------------------------
LType.0:Logarithmic
LType.1:LinUnsigned
LType.2:LinSigned
LType.3:Law Log

# Preference window icon texts ------------------------------------------
P.Devs:Devices
P.Misc:Misc
P.Disp:Display
P.Cols:Colours

