; ArtWorks 2 Help
; Many thanks to Samuel Kock for producing most of this file.
; 
; Info Bar
GH00020E:This is the Undo button. Click to undo the last operation.
GH00020F:This is the Redo button. Click to redo the last operation.
GH00024D:The layer field shows the current layer. Click Menu to display the layer menu.
GH000256:This is the clipboard indicator. If it is ticked then there are objects on the clipboard. Double-click to display them or drag the ticked icon to copy them to the document.
GH000504:This is the WYSIWYG field. It controls the ArtWorks display quality. 0 means outlines only (lowest). 11 means fully anti-aliased (highest).
GH000505:This is the WYSIWYG knob. It controls the ArtWorks display quality. 0 means outlines only (lowest). 11 means fully anti-aliased (highest).
GH000507:This is the grid indicator. Click Select to toggle the 'Lock to grid' state. Click Adjust to toggle both 'Lock to grid' and 'Show grid' at the same time.

;Choices Window
GH000800:This sets general ArtWorks 2 options.
GH005988:This sets options specific to the Crystal Module.
GH00584F:This sets options specific to the JPEGObject Module.
GH001420:This sets Draw file translator options.
GH001620:This sets EPS translator options.
GH0012B1:This sets options specific to the path editing tool.
GH0056BD:This sets options specific to the text area tool.
GH00182B:This sets options specific to the text line tool.

;ArtWorks2 Choices
GH000819:Click here to set the angle constraint when drawing with Ctrl Held down to 90 degrees.
GH000822:Click here to set the angle constraint when drawing with Ctrl held down to 72 degrees.
GH00081A:Click here to set the angle constraint when drawing with Ctrl held down to 60 degrees.
GH00081B:Click here to set the angle constraint when drawing with Ctrl held down to 45 degrees.
GH00081C:Click here to set the angle constraint when drawing with Ctrl held down to 30 degrees.
GH00081D:Click here to set the angle constraint when drawing with Ctrl held down to 15 degrees.
GH000823:Click here to set the angle constraint when drawing with Ctrl held down to 12 degrees.
GH00081F:Enter the angle to which drawing will be constrained to if Ctrl is held down.
GH000816:The selected units for page measurement.
GH000803:Click here to change the default units for displaying co-ordinates on the page.
GH000817:The selected units for font sizes.
GH000804:Click here to change the default units for font sizes.
GH00082B:The selected units for line lengths and widths.
GH00082A:Click here to change the default units for line lengths and widths
GH00080E:Select this option to attach the info bar to the main ArtWorks window.
GH00080D:Select this option to attach the toolbox to the main ArtWorks window.
GH000828:Select this option to not allow the info bar to be moved off the screen.
GH000829:Select this option to not allow the toolbox to be moved off the screen.
GH00080F:Select this option to set the toolbox width to one column.
GH000810:Select this option to set the toolbox width to 2 columns.
GH000811:Select this option to set the toolbox width to 3 columns.
GH000818:Select this option to set the toolbox width to 4 columns.
GH000820:Select this option to remove a document from memory when its window is closed.
GH000824:Select this option to make ArtWorks cache all the modules loaded, thus starting up faster.
GH000827:Select this option to have new objects take the previous object drawn's attributes.
GH000825:Select this option to show the document's page shadow.
GH000812:Select this option to print drawings in the background.
GH000826:Select this option to force any new text typed to have a black fill colour.
GH000813:Enter the number of page units an object will be moved when moved with the cursor keys here.
GH000814:Click here to increase the nudge size by one page unit.
GH000815:Click here to decrease the nudge size by one page unit.
GH000821:Click here to save the changes to this dialogue box.
GH000802:Click here to cancel changes to this dialogue box.
GH000801:Click here to apply (but not save) changes to this dialogue box.
GH00082D:The selected units for use with the onscreen ruler.
GH00082C:Click here to change the units for the onscreen ruler.
GH00082E:Select this option to let ArtWorks give a warning if there are sprites in the sprite pool not used in a document.
GH000805:Click here to select millimetres as the unit of choice.
GH000806:Click here to select centimetres as the unit of choice.
GH000807:Click here to select inches as the unit of choice.
GH000808:Click here to select points as the unit of choice.
GH000809:Click here to select picas as the unit of choice.
GH00080A:Click here to select 90dpi pixels as the unit of choice.

;Crystal Choices
GH005989:Select this option to enable transparency when a new document is created.
GH00598A:Select this option to enable transparency when a document is loaded that uses transparency.
GH00598B:Select this option to enable transparency when the transparency tool is used.
GH00599A:Enter the resolution to print at when printing documents with transparency here. This is only relevant when printing using the PostScript printer driver.
GH00599B:Enter the time (in 1/100ths of a second) ArtWorks will take between rendering intermediate stages for documents containing transparency.
GH00598D:Click here to save the changes to this dialogue box.
GH00598E:Click here to discard the changes to this dialogue box.
GH00598C:Click here to apply (but not save) the changes to this dialogue box.

;JPEGObject choices
GH005850:Select this option to include JPEG objects when exporting to a draw file. The resulting Draw files will only be suitable for RISC OS 3.6 or later. Otherwise, they are saved as Sprites.
GH005851:Select this option to include JPEG objects that have been rotated, flipped or skewed as JPEGs when exporting to a Draw file. Otherwise, they are included as Sprites.
GH005852:Select this option to use error diffusion dithering for displaying JPEG objects in an ArtWorks file.
GH005856:Select this option if you are using !Printers 1.64 or higher. This corrects the bug in which JPEG objects are printed at half size. Do not select if you are using Castle's version of !Printers.
GH005855:Click this button to save the changes to this dialogue box.
GH005854:Click this button to discard the changes to this dialogue box.
GH005853:Click this option to apply (but not save) the changes to this dialogue box.

;Draw Choices
GH001424:Select this option to let ArtWorks retain group information in an exported Draw file.
GH001423:Select this option to let ArtWorks convert all text to paths in an exported Draw file.
GH001427:Select this option to create no new colours when a Draw file is imported.
GH001428:Select this option to create a new colour for all colours in an imported Draw file.
GH001429:Select this option to create new colours only for the standard colours in an imported draw file.
GH001426:Click this button to save the changes to this dialogue box.
GH001422:Click this button to discard all changes to this dialogue box.
GH001421:Click this button to apply (but not save) the changes in this dialogue box.
GH00142A:Select this option to set the quality of Draw file export to low quality.
GH00142B:Select this option to set the quality of Draw file export to medium quality.
GH00142C:Select this option to set the quality of Draw file export to high quality.
GH00142D:Select this option to set the quality of Draw file export to the highest possible quality.
GH00142E:Select this option to export Draw files in the old RISC OS 2 format.
GH00142F:Select this option to export Draw files in the new RISC OS 3 format. Files exported in this way will not work on the RISC OS 2 version of !Draw.

;EPS Choices
GH001623:Select this option to let ArtWorks make use of unnamed colours in imported EPS files.
GH001625:Select this option to include procedures in exported EPS files.
GH001624:Select this option to convert all text objects into path objects when exporting to EPS files.
GH001626:Click this button to save the changes to this dialogue box.
GH001627:Select this option to export EPS files of a medium quality.
GH001628:Select this option to export EPS files of a high quality.
GH001629:Select this option to export EPS files of the highest quality possible.
GH001622:Click this button to discard changes to this dialogue box.
GH001621:Click this button to apply (but not save) the changes to this dialogue box.

;PathTool Choices
GH0012B2:Select this option to set the default join style to a sharp corner.
GH0012B3:Select this option to set the default join style to a round corner.
GH0012B4:Select this option to set the default join style to a cut off corner.
GH0012B6:Click here to save the changes to this dialogue box.
GH0012B7:Click here to cancel changes to this dialogue box.
GH0012B5:Click here to apply (but not save) changes to this dialogue box.

;TextArea Choices
GH0056BE:The default font to be used in all text areas. Click Menu to change the default font.
GH0056BF:Click here to change the default font used in all text areas.
GH0056C0:The default font size for text in a text area. Enter a number here to change the size.
GH0056C2:Click here to increase the default font size in text areas.
GH0056C1:Click here to decrease the default font size in text areas.
GH0056C4:Click here to save the changes to this dialogue box.
GH0056C5:Click here to cancel changes to this dialogue box.
GH0056C3:Click here to apply (but not save) changes to this dialogue box.

;TextTool choices
GH00182C:The default font to be used when creating the first text line. Click Menu to change the default font.
GH00182D:Click here to change the default font used when creating the first text line.
GH00182E:The default font size to be used when creating the first text line. Enter a number here to change the size.
GH001830:Click here to increase the default font size in text lines.
GH00182F:Click here to decrease the default font size in text lines.
GH001832:Click here to save the changes to this dialogue box.
GH001833:Click here to cancel changes to this dialogue box.
GH001831:Click here to apply (but not save) changes to this dialogue box.

;Save File
GH001001:Drag this icon to a Filer window to save the file.
GH001002:Enter the name of the file to be saved here.
GH001003:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a directory display to save the file.

;SVG Export
GH005A0E:Select this option to export the file in SVG 1.0 format.
GH005A0F:Select this option to export the file in SVG 1.1 format.
GH005A06:Select this option to only export the selected objects.
GH005A07:Select this option to use the document's page size as the page size of the SVG file.
GH005A08:Select this option to use the area covered by objects as the page size of the SVG file.
GH005A10:Select this option to include background layers in the exported file.
GH005A11:Select this option to include invisible layers in the exported file.
GH005A0A:Select this option to include all Sprite and JPEg objects in the exported file. These are converted to PNG format for exporting.
GH005A0B:Select this option to use a Sprite's name as is displayed in the Sprite pool as the exported name.
GH005A09:Select this option to export pattern-fills as shape objects, not as an SVG pattern. This also exports pattern-filled text as shapes.
GH005A12:Select this option to export replicated shapes by including several copies of the shape. Otherwise only one copy is exported, but referenced several times.
GH005A0C:Select this option to export all text objects as shapes, losing the ability to edit them as text.
GH005A13:Select this option to enable mapping between RISC OS fonts and fonts from other platforms.
GH005A14:Select this option to enable mapping of font names to font properties in the exported file.
GH005A15:Select this option to map only standard font properties.
GH005A16:Select this option to map all font properties.
GH005A0D:Select this option to not be asked if a file should be overwritten when exporting. This applies to both SVG files and to Sprite or JPEG files that are exported.
GH005A05:Drag this icon to a directory display to save it with the current filename.
GH005A02:Type the name of file to be saved in this box.
GH005A04:Click this button to discard changes to this dialogue box.
GH005A17:Click this button to switch all options in this dialogue box to their default values.
GH005A01:Click this option to open the SVG Export manual in text format.
GH005A03:If there is a full pathname in the above edit box, click this button to save the file. Otherwise drag the file icon to a directory viewer.

;Draw Export
GH001401:Drag this icon to a Filer window to save the file.
GH001402:Enter the name of the file to be saved here.
GH001403:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a directory display to save the file.
GH001405:Select this option to only export the selected objects.

;ArtWorks EPS export
GH001601:Drag this icon to a Filer window to save the file.
GH001602:Enter the name of the file to be saved here.
GH001603:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a directory display to save the file.
GH001608:Select this option to only export the selected objects.

;Illustrator 88, 3, Corel Draw 2,3 export
GH001601:Drag this icon to a Filer window to save the file.
GH001602:Enter the name of the file to be saved here.
GH001603:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a directory display to save the file.
GH001608:Select this option to only export the selected objects.

;Bitmap Export
GH005777:Select this option to export the document as a Sprite.
GH00577A:Select this option to export the document as a GIF file.
GH0057AC:Select this option to export the document as a TIFF file.
GH005764:Select this option to export the document using 16 colours.
GH005765:Select this option to export the document using 256 colours.
GH005766:Select this option to export the document using thousands of colours.
GH005767:Select this option to export the document using millions of colours.
GH00567C:Select this option to export the document to a specific width.
GH00576D:Enter the desired width of the exported bitmap, and press return to update the other scaling values.
GH00576E:Select this option to export the document to a specific height.
GH00576F:Enter the desired height of the exported bitmap, and press Return to update the other values.
GH005770:Select this option to export the document at a specific scale.
GH005771:Enter the desired scale as a percentage, and press REturn to update the other values.
GH005778:Select this option to export the document at a specific resolution (in dpi).
GH005779:Enter the desired resolution of the exported bitmap, and press Return to update the other values.
GH005768:Select this option to export the entire ArtWorks page as a bitmap.
GH005769:Select this option to export only the area covered by the document as a bitmap.
GH00576A:Select this option to only export the selected objects as a bitmap.
GH00576B:Select this option to export the selection as a bitmap, including those objects partially or totally in the rectangular area covered by the selected objects.
GH005776:Enter the width of the border of the image in pixels, and press Return.
GH0057A2:Click this button to increase the border width around the exported image.
GH0057A3:Click this button to decrease the border width around the exported image.
GH005773:Enter the numeric value of the desired quality setting for the exported image here. These are in the range of 0 (Outlines only) to 11 (Fully Anti-Aliased).
GH0057A0:Click this button to increase the quality of the exported image.
GH0057A1:Click this button to decrease the quality of the exported image.
GH0057A4:Click this button to select the quality setting from a list of presets.
GH005761:Drag this icon to a directory viewer to export the image.
GH0057A9:Enter the filename of the exported image here.
GH005774:Select this option to export the image with a transparent background.
GH0057AB:Select this option to take transparency information into account when exporting the image.
GH00577B:Select this option to export an interlaced image. (GIF files only)
GH005775:Select this option to error-diffuse exported images to simulate more colours in low colour modes. 
GH00577C:Select this option to export the image with the standard 16 or 256 colour palette.
GH00577D:Select this option to export the image with a standard greyscale palette.
GH00577E:Select this option to export the image with the 216 colour palette used by Netscape and Internet Explorer for Windows and MacOS.
GH00577F:Select this option to export the image with a palette that is the closest match to the colours used in the document.
GH005763:Click this button to close this window and discard all changes.
GH0057AA:Click this button to display the BMExport textual manual.
GH005762:If there is a pathname present in the edit box, click this button to export the image. Otherwise drag the above icon to a directory display to save.

;Export Colour table
GH001651:Drag this icon to a Filer window to save the file.
GH001603:Enter the name of the file to be saved here.
GH001602:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a directory display to save the file.

;Print Dialogue box
GH000D05:Click this button to print the current document upright (portrait format).
GH000D06:Click this button to print the current document sideways (landscape format).
GH000D0A:Select this option to fit more than one copy of a document on a single sheet of paper. The number in brackets shows how many documents per sheet of paper.
GH000D08:Select this option to print a mirror image version of the current document.
Copies Missing...
GH000D1F:Select this option if outputting to a PostScript printer.
GH000D20:Enter the desired halftone screen here.
GH000D07:Select this option to fit the current document on the current paper size.
GH000D03:Select this option to alter the size of the printed document.
GH000D04:Enter the required size (as a percentage) of the printed document here.
GH000D09:Select this option to print a large document over several sheets of paper.
GH000D2D:Enter the first tile number to be printed here. Tiles are numbered from top left to bottom right.
GH000D2E:Enter the last tile number to be printed here. Tiles are numbered from top left to bottom right.
GH000D0B:Enter the amount by which two tiles will overlap here, in page units. This is to make lining up tiles easier.
GH000D0C:Select this option to show marks where the printed page must be cut to get the correct page size.
GH000D32:Select this option to print the current document as a line drawing without any fills or effects.
GH000D0E:Select this option to print all layers in the foreground, whether they are visible or not.
GH000D0F:Select this option to print only layers which are in the foreground and visible.
GH000D10:Select this option to print the current document in full-colour.
GH000D11:Select this option to print the current document having a separate printout for each of the four main colours (Cyan, Magenta, Yellow and Black).
GH000D33:Select this option to take into account differences between colours showed on screen and printed on paper for a specific printer.
GH000D34:Select this option to send page size parameters to the printer before printing. This only applies to PostScript printers.
GH000D12:Click this button to alter the way in which colour separations are printed.
GH000D22:Click this button to apply his dialogue box's settings without printing anything.
GH000D02:Click this button to abandon all changes to this dialogue box.
GH000D01:Click this button to print the current document with the above settings. Settings will be saved for future use.
GH000D38:Select this option to use the values specified in the Print Setup tool when printing the document.
GH000D39:Select this option ignore the margins set up in the current printer totally, thereby printing right up to the edge of the paper. Note that this might lead to objects being cut-off when printing.

;Separation setup
GH000D16:Select this option to print each colour's name on each separation.
GH000D17:Select this option to print marks that make it easier to line up different separations when they are placed over each other.
GH000D18:Select this option to enable the selected ink to be printed as a separation.
GH000D1C:Enter the amount (in degrees) by which the selected separation's colour screen must be rotated here. This option is for advanced users only, only use if you know what you are doing.
GH000D21:Select this option to use recommended amounts for the angle by which each separation's colour screen will be rotated.
GH000D1A:Click this button to select all separation inks for printing.
GH000D1B:Click this button to select none of the separation inks for printing.
GH000D23:Enter the resolution of the target printer here. For imagesetting, check with your printing bureau which value to use.
GH000D24:click this button to select printer resolution from a few commonly used values.
GH000D1E:Click this button to discard all changes from this dialogue box.
GH000D1D:Click this option to apply all changes to this dialogue box.

;Document choices
GH00032C:Click this button to show options regarding the page the document is on.
GH000B00:Click this button to show general document options.
GH005526:Click this button to show options relating to auto-saving the document.

;Page setup
GH000302:Select this option to make the document page upright (portrait format).
GH000303:Select this option to make the document page sideways (landscape format).
GH00030A:Select this option to set an A0 sized document.
GH00020B:Select this option to set an A1 sized document.
GH00030C:Select this option to set an A2 sized document.
GH00030D:Select this option to set an A3 sized document
GH00030E:Select this option to set an A4 sized document.
GH00030F:Select this option to set an A5 sized document.
GH000310:Select this option to set an A6 sized document.
GH000311:Select this option to set a document the size of your own choosing.
GH000304:Enter the width of your custom page size here.
GH000305:Enter the height of your custom page size here.
GH000306:Documents that go right to the edge of a piece of paper sometimes need to be made a little bigger than the actual page size to allow for errors during trimming. Enter that amount (in page units) here.
GH000308:The current background colour of the document is shown here.
GH000307:Click this button to select a default background colour for the document.
GH000301:click this button to discard all changes made to this dialogue box.
GH000300:Click this button to apply all changes made to this dialogue box.

;General document options.
GH000B03:Drag this slider to increase or decrease the maximum memory allocated to the buffer which remembers your drawing actions. The bigger this buffer, the more actions can be undone.
GH000B06:Click this button to increase the buffer which remembers your drawing actions.
GH000B07:Click this button to decrease the buffer which remembers your actions.
GH000B05:This displays the current size (in Kilobytes) of the undo buffer.
GH000B04:Select this option to save the undo buffer with your document, thus enabling you to undo actions even when a file is loaded from scratch.
GH000B08:Select this option to dither all colour sprites in the current document, thereby improving quality in low colour modes.
GH000B02:Click this button to discard any changes made to this dialogue box.
GH000B01:Click this button to apply all changes made to this dialogue box.

;Auto Save options
GH005524:Select this option to enable auto saving of this document.
GH005525:Select this option to display a window each time the documents has to be auto saved.
GH005521:Enter the interval between auto saves (in minutes) here.
GH005523:Click this button to discard any changes made to this dialogue box.
GH005522:Click this button to apply the changes made in this dialogue box.

;Alignment
;some of the radio buttons all have the same number, weird...
GH001915:Select this option to enable aligning objects top to bottom.
GH001916:Select this option to align objects top to bottom.
GH001917:Select this option to align objects so that all their top edges are in a straight line.
GH001918:Select this option to enable aligning objects left to right.
GH001919:Select this option to align objects left to right.
GH00191A:Select this option to align objects so that their left edges are in a straight line.
GH001914:This window shows a preview of the resulting alignment using the selected options.
GH001912:Click this button to abandon aligning objects.
GH001913:Click this button to align/distribute the selected objects.

;Shape info
GH001279:This shows the number of control points the selected shape has.
GH001284:Select this option to let the selected shape have a filled in interior.
GH001285:Select this option to connect the shape's end point to it's start point, making it a closed off shape.
GH0012A4:Select this option to calculate the area of the selected shape. The shape must be a closed shape for this option to give any result.
GH0012A5:This box displays the surface area of the selected shape, if known.
GH00127B:This box displays the current X position of the selected control point, relative to bottom left of page. Enter a value here to set the X position.
GH00127C:This box displays the current Y position of the selected control point, relative to bottom left of page. Enter a value here to set the Y position.
GH00127D:This box displays the current X position of the selected control point's first curve handle, relative to bottom left of page. Enter a value here to set the X position.
GH00127E:This box displays the current Y position of the selected control point's first curve handle, relative to bottom left of page. Enter a value here to set the Y position.
GH00127F:This box displays the current X position of the selected control point's second curve handle, relative to bottom left of page. Enter a value here to set the X position.
GH001280:This box displays the current Y position of the selected control point's second curve handle, relative to bottom left of page. Enter a value here to set the Y position.
GH001283:Click this button to reverse the order of the control points of the selected line/shape.
GH001282:Click this button to discard changes to this dialogue box.
GH001281:Click this button to apply the changes to this dialogue box.

;Filter
GH005701:Select this option to match objects based on their types.
GH005702:Select this option to match all lines (open paths) in the document.
GH005703:Select this option to match all shapes (closed paths) in the document.
GH005704:Select this option to match all Ellipse objects in the document.
GH005705:Select this option to match all Rectangle objects in the document.
GH005706:Select this option to match all Rounded Rectangle objects in the document.
GH005707:Select this option to match all Polygon objects in the document.
GH005708:Select this option to match all lines of text in the document.
GH005709:Select this option to match all Blend objects in the document.
GH00570A:Select this option to match all grouped objects in the document.
GH00570B:Select this option to match all Envelope objects in the document.
GH00570C:Select this option to match all perspective objects in the document.
GH00570D:Select this option to match all Sprite objects in the document.
GH00574D:Select this option to match all replicated objects in the document.
GH00574E:Select this option to match all text areas in the document.
GH00574F:Select this option to match all JPEG objects in the document.
GH00573C:Click this button to match no objects.
GH00573B:Click this button to match all objects.
GH00570E:Select this option to match objects based on the types of fill they have
GH00570F:Select this option to match each object that has a flat fill colour.
GH005710:Select this option to match objects with a specific flat fill colour.
GH005712:Click here to choose the colour to match.
GH005713:Select this option to match each object that has a graduated fill.
GH005714:Select this option to match objects with a specific graduated fill start colour.
GH005716:Click here to choose a start colour to match.
GH005717:Select this option to match objects with a specific graduated fill end colour.
GH005718:Click here to choose the end colour to match.
GH00571A:Select this option to match each object that has a radial fill.
GH00571B:Select this option to match objects with a specific radial fill start colour.
GH00571D:Click here to choose the start colour to match.
GH00571E:Select this option to match objects with a specific radial fill end colour.
GH005720:Click here to choose the end colour to match.
GH005721:Select this option to match each object with a pattern fill.
GH005722:Select this option match objects with a specific pattern fill foreground colour.
GH005724:Click here to select the foreground colour to match.
GH005725:Select this option to match objects with a specific pattern fill background colour:
GH005727:Click here to select the background colour to match.
GH005728:Select this option to match this pattern fill style.
GH005729:Select this option to match this pattern fill style.
GH00572A:Select this option to match this pattern fill style.
GH00572B:Select this option to match this pattern fill style.
GH00572C:Select this option to match this pattern fill style.
GH00574B:Select this option to match this pattern fill style.
GH005732:Select this option to match objects based on their line colours.
GH005734:Click here to select a line colour to match.
GH005735:Select this option to match objects on their line widths.
GH005736:This box shows the current operator for choosing a line width to filter on.
GH005737:Click this button to select the operator for filtering on the line width. These are smaller than, smaller or equal to, equal to, greater or equal to and greater.
GH005738:Enter the desired line width for use with filtering here.
GH005742:Select this option to match objects based on the fonts used.
GH005743:This displays the current font to be matched. Click to display a menu to change the font.
GH005744:Click to change the font to be filtered on.
GH005745:Select this option to match objects based on the font sizes they use.
GH005746:This box shows the current operator for choosing a font size to filter on.
GH005747:Click this button to select the operator for filtering on the font size. These are smaller than, smaller or equal to, equal to, greater or equal to and greater.
GH005748:Enter the desired font size for use with filtering here.
GH00573A:Click this button to abandon the filtering operation.
GH005749:Click this button to reset this dialogue box to its initial state.
GH00574A:Click this button to deselect all objects that match the filter specification.
GH005739:Click this button to filter the current selection with the chosen filtering criteria. This deselects all objects that do not match the filter specification.

;Line width
GH0012B0:This shows the line with of the selected object. Enter a number in line width units here and press Return to change the line width of the object.
GH001230:Click this button to set the line thickness of the selected object.

;Line ends
GH001238:Select this option to set the end of the selected line to a flat square shape.
GH001239:Select this option to set the end of the selected line to a round shape.
GH00123A:Select this option to set the end of the selected line to a square shape.
GH00123D:Click this button to discard changes to the line ends.
GH00123C:click this button to apply the changes to the line ends.

;Arrowheads
GH001240:This shows the current arrowhead design for the start of a line. Click Select or Menu to change the arrowhead type.
GH001297:This shows the size of the arrowhead. Enter a number to change the arrowhead size.
GH001299:Click this button to increase the arrowhead size.
GH00129A:Click this button to decrease the arrowhead size.
GH00123E:Click this button to change the arrowhead type.
GH001241:This shows the current arrowhead design for the end of a line. Click Select or Menu to change the arrowhead type.
GH001298:This shows the size of the arrowhead. Enter a number to change the arrowhead size.
GH00129B:Click this button to increase the arrowhead size.
GH00129C:Click this button to decrease the arrowhead size.
GH00123F:Click this button to change the arrowhead type.
GH001288:Click this button to discard changes to the arrowheads of a line.
GH001287:Click this button to apply changes to the arrowheads of a line.
GH0012AE:Select this option to change the length of the arrowhead.
GH0012A8:This shows the current length of the arrowhead. Enter a number here to change the arrowhead length.
GH0012AA:Click this button to increase the length of the arrowhead.
GH0012AB:Click this button to decrease the length of the arrowhead.
GH0012AF:Select this option to change the length of the arrowhead.
GH0012A9:This shows the current length of the arrowhead. Enter a number here to change the arrowhead length.
GH0012AC:Click this button to increase the length of the arrowhead.
GH0012AD:Click this button to decrease the length of the arrowhead.

;Dash pattern
GH001226:Click here to select this dash pattern.
GH001227:Click here to select this dash pattern.
GH001228:Click here to select this dash pattern.
GH001229:Click here to select this dash pattern.
GH00122A:Click here to select this dash pattern.
GH00122B:Click here to select this dash pattern.
GH00122C:Click here to select this dash pattern.
GH0012A0:Select this option to define a dash pattern different to those provided above.
GH0012A1:Enter the formula for a user-defined dash pattern here. It is in the form <length of line>, <length of gap>,<length of line>,... At the end of the pattern it auto-repeats.
GH0012A2:This is an example user-defined dash pattern.
GH0012A3:This shows the current start offset of the dash pattern. Enter a number here to change the offset.
GH0012A6:Click this button to save the current dash pattern to the dash pattern clipboard.
GH0012A7:Click this button to load a saved dash pattern from the dash pattern clipboard.
GH00122E:Click this button to discard changes to the dash pattern of a line.
GH00122D:Click this button to apply changes to the dash pattern of a line.

;Join style
GH00121B:Select this option to make all corners of a line have a sharp edge.
GH00121C:Select this option to make all corners of a line have a round edge.
GH00121D:Select this option to make all corners of a line have a flat edge.
GH001235:Click this button to discard changes to the join style of a line.
GH001234:click this button to apply changes to the join style of a line.

;Grid
GH000900:This shows the spacing between major divisions of the grid. Enter a number in page units here to change the size of the major divisions of the grid.
GH000901:This shows the amount of minor subdivisions between each major division of the grid. Enter a number here to change the number of subdivisions in each major division.
GH000902:Select this option to make the grid visible on screen.
GH000903:Select this option to make all drawing operations automatically go to the nearest grid point.
GH000911:Click this button to discard changes to the grid settings.
GH000910:Click this button to apply changes to the grid settings.

;Extra Grids
GH0057D3:This shows the selected grid type. Click Select or Menu to change the grid type.
GH0057D4:This shows the spacing between major divisions of the grid. Enter a number in page units here to change the size of the major divisions of the grid.
GH0057D5:This shows the amount of minor subdivisions between each major division of the grid. Enter a number here to change the number of subdivisions in each major division.
GH0057D6:Click this button to increase the amount of minor subdivisions for each major division.
GH0057D7:click this button to decrease the amount of subdivisions for each major division.
GH0057E8:This shows the current X origin of the grid, relative to the bottom left corner of the document. Enter a number in page units here to change the X origin.
GH0057E9:This shows the current Y origin of the grid, relative to the bottom left corner of the document. Enter a number in page units here to change the Y origin.
GH0057EC:Click this button to set the grid origin to the top left corner of the document.
GH0057EF:Click this button to set the grid origin to the top middle edge of the document.
GH0057F2:Click this button to set the grid origin to the top right corner of the document.
GH0057EB:Click this button to set the grid origin to the center left edge of the document.
GH0057EE:Click this button to set the grid origin to the center of the document.
GH0057F1:Click this button to set the grid origin to the right center edge of the document.
GH0057EA:Click this button to set the grid origin to the bottom left corner of the document.
GH0057ED:Click this button ot set the grid origin to the bottom center edge of the document.
GH0057F0:Click this button to set the grid origin to the bottom right corner of the document.
GH0057DC:This shows the spacing of major subdivisions in the vertical directions. Enter a number in page units here to change the vertical major subdivision spacing.
GH0057E7:With circular grids, this shows the amount of major subdivisions in the grid. Enter a number here to change the amount of major subdivisions.
GH0057DD:Click this button to increase the amount of major subdivisions for circular grids.
GH0057DE:Click this button to decrease the amount of major subdivisions for circular grids.
GH0057E0:This shows the amount of subdivisions in each major division in the vertical direction.
GH0057E1:Click this button to increase the amount of vertical subdivisions for each major division.
GH0057E2:Click this button to decrease the amount of vertical subdivisions for each major division.
GH0057D2:Click this button to discard all changes to the extra grids setup.
GH0057F3:Click this button to view the extra grids manual in text format.
GH0057D1:Click this button to apply changes to the extra grids setup.

;Show co-ordinates
GH0055A1:This shows the current X co-ordinate of the pointer on screen.
GH0055A2:This shows the current Y co-ordinate of the pointer on screen.
GH0055A3:Select this option to make the co-ordinates ignore grid points on the document by not snapping to them.

;New Colour/Edit Colour
;Sliders have same number for CMYK and RGB.
GH000600:This shows the amount of the colour name next to the slider in a colour. Drag this slider to change the amount of that colour.
GH000601:This shows the amount of the colour name next to the slider in a colour. Drag this slider to change the amount of that colour.
GH000602:This shows the amount of the colour name next to the slider in a colour. Drag this slider to change the amount of that colour.
GH000603:This shows the amount of the colour name next to the slider in a colour. Drag this slider to change the amount of that colour.
GH000604:This shows the amount of the colour above in a colour as a percentage. Enter a number here to change the percentage of that colour.
GH000605:This shows the amount of the colour above in a colour as a percentage. Enter a number here to change the percentage of that colour.
GH000606:This shows the amount of the colour above in a colour as a percentage. Enter a number here to change the percentage of that colour.
GH000607:This shows the amount of the colour above in a colour as a percentage. Enter a number here to change the percentage of that colour.
GH000602:This shows the position in the colour cube of the current colour. Click to select another colour on this slice of the cube.
GH000621:This shows the selected basic colour. Drag this to select another basic colour.
GH000604:This shows the angle of the current basic colour in the colour sphere. Enter a number here to change the basic colour.
GH000605:This shows the amount of white in the selected colour as a percentage. Enter a number to change the amount of white in a colour.
GH000606:This shows the amount of black in the selected colour as a percentage. Enter a number to change the amount of black in the colour.
GH00060B:Select this option to choose a colour using values of red, green and blue.
GH00060C:Select this option to choose a colour using values of cyan, magenta, yellow and key (black).
GH00060D:Select this option to choose a colour using values of the basic colour together with adding values of black and white.
GH00060E:Select this option to have the colour be made up of only one ink during printing.
GH00060F:Select this option to have the colour be made up of all the basic inks used in the printing process. These are cyan, magenta, yellow and black.
GH000610:Select this option make the colour be based on another colour.
GH000611:This shows the colour the current colour will be based on. Click Select or Menu to change this colour.
GH000624:Click this button to change the colour the current colour will be based upon.
;Tint slider & input field same number as RGB.
GH000608:This shows the name of the current colour. To change the name, enter it here. Press Menu to select another colour.
GH000623:Click this button to change the colour being edited.
GH000609:This shows a preview of the edited colour.
GH00060A:This shows a preview of the original (unedited) colour.
GH00061F:Click this button to discard all changes made to a colour.
GH000610:Click this button to apply all changes made to a colour. All occurrences of this colour in a document will change to reflect the changes.

;Sprite info dialogue box
GH002402:Select this option to alter options regarding the size and position of the current Sprite.
GH002405:This field shows the name of the selected Sprite.
GH002406:This field shows the width of the current Sprite, in pixels.
GH002407:This field shows the height of the current Sprite, in pixels.
GH002408:This field shows the size of the current Sprite, in bytes.
GH002409:This field shows whether the current Sprite contains a mask or not.
GH00242F:This field shows the resolution of the current Sprite.
GH00240A:This field shows the number of colours in the current Sprite.
GH002403:Select this option to alter the palette of a 256 colour Sprite.
GH00241F:This shows the colours present in the current Sprite's palette. Click on a colour to edit that colour.
GH002413:Drag this slider to change the amount of red in the current colour.
GH002416:This field shows the amount of red in the current colour as a number. Enter a number here to change the amount of red in the current colour.
GH002419:Click this button to increase the amount of red in the current colour.
GH00241A:Click this button to decrease the amount of red in the current colour.
GH002414:Drag this slider to change the amount of green in the current colour.
GH002417:This field shows the amount of green in the current colour as a number. Enter a number here to change the amount of green in the current colour.
GH00241B:Click this button to increase the amount of green in the current colour.
GH00241C:Click this button to decrease the amount of green in the current colour.
GH002415:Drag this slider to change the amount of blue in the current colour.
GH002418:This field shows the amount of blue in the current colour as a number. Enter a number here to change the amount of blue in the current colour.
GH00241D:Click this button to increase the amount of blue in the current colour.
GH00241E:Click this button to decrease the amount of blue in the current colour.
GH002421:This shows the edited colour of the current colour.
GH002420:This shows the original colour of the current colour.
GH002404:Select this option to change the start and end colours of a 256 colour greyscale Sprite.
GH002423:Click here to change the start colour of the palette of the current Sprite.
GH002424:Click here to change the end colour of the palette of the current Sprite.
GH002426:This shows how the current Sprite's palette will look between the two selected colours.
GH002401:Click this button to abandon all changes made to this dialogue box.
GH002400:Click this button to accept all changes made to this dialogue box.

;JPEG info dialogue box
GH005842:This field shows the width of the current JPEG image, in pixels.
GH005843:This field shows the height of the current JPEG image, in pixels.
GH005844:This field shows the size of the current JPEG image, in bytes.
GH005845:This field shows the X co-ordinate of the bottom left corner of the JPEG image, relative to the page origin. Enter a number here to change the X co-ordinate.
GH005846:This field shows the Y co-ordinate of the bottom left corner of the JPEG image, relative to the page origin. Enter a number here to change the Y co-ordinate.
GH005847:Select this option to change the size of a JPEG image using values for its width and height.
GH00584A:Select this option to change the size of a JPEG image using a scale and aspect ratio value.
GH005848:This field shows the width of the current JPEG image. Enter a number here to change the image width.
GH005849:This field shows the height of the current JPEG image. Enter a number here to change the image height.
GH00584B:This field shows the scale of the current image as a percentage. Enter a number here to change the scale percentage.
GH00584C: This field shows the aspect ratio (width:height) of the current image as a percentage. Enter a number here to change the aspect ratio percentage.
GH005840:Click this button to reset the current images' values to those used at the time of loading.
GH00584E:Click this button to abandon all changes made to this dialogue box.
GH00584D:Click this button to accept and apply all changes made to this dialogue box.
;JPEG info
GH005858:Click this button to save the current JPEG image outside of the document.
GH005857:This field shows the resolution of the current JPEG image, in dots per inch.

;JPEG save box
GH005859:Drag the icon to a filer window to save the file.
GH00585A:Enter the name of the file to be saved here.
GH00585B:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a filer window to save the file.

;Select Tool infobar.
GH000235:Click this button to move the selected object forward in the current layer.
GH000236:Click this button to move the selected object backward in the current layer.
GH000216:Click this button to move the selected object in front of all other objects in the current layer.
GH000215:Click this button to move the selected object behind all other objects in the current layer.

;Freehand tool infobar
GH001261:This shows the current setting for how ArtWorks fits the final line to the freehand line. Drag this slider to set the accuracy of the final line. A higher value means more line segments will be used.
GH001262:This shows the current accuracy setting as a numeric value.

;Curve and line tool infobar.
GH001255:Click this button to change the selected curve segment into a sharp curve.
GH001263:Click this button to change the selected curve segment into a smooth curve.
GH001264:Click this button to change a curved line segment into a straight line segment.
GH001265:Click this button to change a straight line segment into a curved line segment.
GH001260:Click this button to delete the selected control point of a line or curve.
GH001266:Click this button to split the line into two parts at the selected control point.

;Rectangle tool infobar
GH00128A:This is the X co-ordinate of the current rectangle. Enter a number here and press Return to change the X co-ordinate of the rectangle.
GH00128B:This is the Y co-ordinate of the current rectangle. Enter a number here and press Return to change the Y co-ordinate of the rectangle.
GH00128C:This is the width of the current rectangle. Enter a number here and press Return to change the width of the rectangle.
GH00128D:This is the height of the current rectangle. Enter a number here and press Return to change the height of the rectangle.

;ellipse tool info bar
GH001293:This is the X co-ordinate of the centre of the current ellipse. Enter a number here and press Return to change the X co-ordinate of the centre of the ellipse.
GH001294:This is the Y co-ordinate of the centre of the current ellipse. Enter a number here and press Return to change the Y co-ordinate of the center of the ellipse.
GH001295:This is the radius of the longest side of the current ellipse. Enter a number here and press Return to change the longest side's radius of the ellipse
GH001296:This is the radius of the shortest side of the current ellipse. Enter a number here and press Return to change the shortest side's radius of the ellipse.

;rounded rectangle tool info bar
GH00129F:Select this option to make a rounded rectangle have convex rounded corners instead of the normal concave rounded corners.
GH001292:This is the radius of each of the corners of the current rounded rectangle. Enter a number her and press Return to change the radius.
GH00128E:This is the X co-ordinate of the current rounded rectangle. Enter a number here and press Return to change the X co-ordinate.
GH00128F:This is the Y co-ordinate of the current rounded rectangle. Enter a number here and press Return to change the Y co-ordinate.
GH001290:This is the width of the current rounded rectangle. Enter a number here and press Return to change the width.
GH001291:This is the height of the current rounded rectangle. Enter a number here and press Return to change the height.

;polygon tool info bar
GH005507:Select this option to change between a star shape and a polygon shape for the current polygon.
GH005510:Select this option to make the outside corners of the selected polygon round.
GH005501:This is the X co-ordinate of the centre of the current polygon. Enter a number here and press Return to change the X co-ordinate.
GH005502:This is the Y co-ordinate of the centre of the current polygon. Enter a number here and press Return to change the Y co-ordinate.
GH005503:This is the radius of the current polygon, from centre to edge. Enter a number here and press Return to change the radius.
GH00550F:This is how round the corners of the current polygon are, where 0% is a sharp corner and 100% is the roundest corner.
GH005504:This is the number of sides of the current polygon. Enter a number here and press Return to change the number of sides.
GH005505:Click this button to increase the number of sides of the current polygon.
GH005506:Click this button to decrease the number of sides of the current polygon.
GH00550A:Click this button for more polygon options, specifically for star shaped polygons, or to go back to the basic polygon options.
GH005512:Select this option to make the interior corners of a star shaped polygon round.
GH00550B:This is the radius of the inner corners of a star shaped polygon, measured from the centre to an inner corner. Enter a number here and press Return to change this radius.
GH00550D:Click this button to set the inner radius of a star shaped polygon to half the distance of the outer radius of the star shaped polygon.
GH005513:This is how round the inner corners of the star shaped polygon are, where 0% is a sharp corner and 100% is the most round corner.
GH00550C:This is the angle between two neighbouring outer corners of the polygon. Enter a number here and press Return to change the angle.
GH00550E:Click this button to change the angle of two neighbouring outer corners of a polygon to its default value.

;fill/line colour info bar
GH001256:Click here to change the fill (interior) colour of the selected objects.
GH001248:click here to change the line colour of the selected objects.

;pattern-fill info bar
GH005607:Click this button to switch between hatch type mode and parameters mode.
GH005601:This shows the selected hatch type. Click here to change the selected hatch type.
GH005602:Click this button to change the selected hatch type.
GH005604:Click here to change the foreground colour of the current hatch pattern.
GH005606:Click here to change the background colour of the current hatch pattern.
GH00562E:Click this button to bring up a menu to show, edit and update user-defined hatch styles.
GH005609:This shows the distance between the centres of repeating patterns. Enter a number here and press Return to change the distance.
GH00560A:This shows the size of each pattern in each hatch type. Enter a number here and press Return to change the size.
GH00560B:This shows the absolute angle of the pattern. Enter a number here and press Return to change the angle.
GH00560C:This shows the angle for the second pattern in a cross hatch pattern. Enter a number here and press Return to change the angle.
GH005608:Click this button to toggle whether the hatch fill of an objects gets transformed (rotated or scaled) with the object.
GH00560E:Click this button to toggle whether the hatch fill of an object moves if the object is moved. Otherwise the hatch fill moves relative to the object.
GH00560F:Click this button to reset the alignment of a hatch fill to its default value. This means the origin of the hatch fill is the page origin.
GH00562C:Click this button to display the pattern in a square shape.
GH00562D:Click this button to display the pattern in a hexagonal shape.
GH00562B:This button toggles whether the pattern shape has extra pattern elements inbetween the main pattern elements, creating a "brick wall" effect.
GH005609:This shows the horizontal distance between pattern elements. Enter a number here and press Return to change the horizontal distance.
GH00560C:This shows the vertical distance between pattern elements. Enter a number here and press Return to change the vertical distance.
GH00560A:This shows the width of each individual pattern element. Enter a number here and press Return to change the vertical distance.
GH005637:Click this button to toggle whether the horizontal and vertical distances are scaled independently from each other when an object is scaled.
GH00560B:This shows he absolute angle of the pattern fill, measured from the horizontal. Enter a number here and press Return to change the absolute angle.

;pattern manager info bar
GH00561A:click this button to retrieve the pattern fill from the selected hatch-filled object.
GH005617:Click this button to create a new pattern fill using the selected shape.
GH005616:This shows the name of the pattern fill. Enter a name here and press Return to give a new pattern fill a name.
GH00561B:Click this button to select a pattern fill to edit.
GH005618:Click this button to change the current pattern fill object to the selected shape.
GH005619:Click this button to delete the current pattern fill. Note: Confirmation will not be asked!
GH00561C:Click this button to set the hotspot of the pattern fill shape to its top left corner.
GH00561D:Click this button to set the hotspot of the pattern fill shape to the centre of its top edge.
GH00561E:Click this button to set the hotspot of the pattern fill shape to its top right corner.
GH00561F:Click this button to set the hotspot of the pattern fill shape to the centre of its left edge.
GH005620:Click this button to set the hotspot of the pattern fill shape to the centre of the shape.
GH005621:Click this button to set the hotspot of the pattern fill shape to the centre of its right edge.
GH005622:Click this button to set the hotspot of the pattern fill shape to its bottom left corner.
GH005623:Click this button to set the hotspot of the pattern fill shape to the centre of its bottom edge.
GH005624:Click this button to se-t the hotspot of the pattern fill shape to its bottom right corner.

;linear/radial graded fill infobar
GH001244:Click here to set the start colour of a graduated fill.
GH001246:Click here to set the end colour of a graduated fill.

;rotate tool info bar
GH001A05:Enter a number here and press Return to rotate the selected object by that amount of degrees.
GH001A02:Enter a number here and press Return to rotate the selected objects to a specific number of degrees.
GH001A03:This is the X co-ordinate of the transformation origin. Enter a number here and press Return to change the X co-ordinate.
GH001A04:This is the Y co-ordinate of the transformation origin. Enter a number here and press Return to change the Y co-ordinate.
GH001A06:Click this button to set the centre of rotation, scaling or skewing to the top left corner of the selection.
GH001A07:Click this button to set the centre of rotation, scaling or skewing to the centre of the top edge of the selection.
GH001A08:Click this button to set the centre of rotation, scaling or skewing to the top right corner of the selection.
GH001A09:Click this button to set the centre of rotation, scaling or skewing to the centre of the left edge of the selection.
GH001A0A:Click this button to set the centre of rotation, scaling or skewing to the centre of the selection.
GH001A0B:Click this button to set the centre of rotation, scaling or skewing to the centre of the right edge of the selection.
GH001A0C:Click this button to set the centre of rotation, scaling or skewing to the selected objects' bottom left corner of the selection.
GH001A0D:Click this button to set the centre of rotation, scaling or skewing to the centre of the bottom edge of the selection.
GH001A0E:Click this button to set the centre of rotation, scaling or skewing to the bottom right corner of the selection.

;scale tool infobar
GH001A12:Enter the amount to scale the selected objects by here, and press Return. For example, a value of 0.5 halve the object size, and a value of 2 will double it.
GH001A13:Enter the ratio of width to height here and press Return. For example, a value of 50% will make the object two times longer than its width, whilst a value of 200% will make the object two times wider than its length.
GH001A16:Select this option to allow the thickness of lines to be scaled as well.
GH001A0F:Select this option to lock the aspect ratio of the selection during scaling.
GH001A10:Click this button to flip the selected objects around the X axis defined by the flip centre.
GH001A11:Click this button to flip the selected object around the Y axis defined by the flip centre.

;envelope/perspective tool infobar
GH00200D:Click this button to show or hide a grid in the selected objects, to help with the visualisation of the distortion/perspective.
GH00200A:Click this button to copy the current envelope shape to the envelope clipboard.
GH002008:Click this button to apply a copied envelope shape to the selected objects from the envelope clipboard.
GH002010:Click this button to remove an envelope from the selected objects. The object will look as it did before any distortion was applied.

;perspective tool infobar
GH00200B:Click this button to copy the current perspective shape to the perspective clipboard.
GH002009:Click this button to apply a copied perspective shape to the selected objects from the perspective clipboard.
GH002011:Click this button to remove a perspective from the selected objects. The object will look as it did before any perspective effect was applied.

;replicate tool info bar.
GH00557E:Click this button to select the type of replication for the selected objects.
GH005562:This shows the current type of replication used. Click here to change the replication type, or to remove it.
GH005563:Click this button to change the replication type, or to remove it.
GH005561:Click this button to change the distances between replicated objects.
GH00557F:Click this button to view the replicate tool's text help file.
GH005564:Click this button to convert all the replicated shapes into editable objects.
GH005565:Enter the number of columns to be used for replication here and press Return.
GH005566:Click this button to increase the number of columns in the replication.
GH005567:click this button to decrease the number of columns in the replication.
GH005568:Enter the number of rows to be used in the replication here and press Return.
GH005569:Click this button to increase the number of rows in the replication.
GH005570:Click this button to decrease the number of rows in the replication.
GH00556C:Enter the horizontal distance between replicated objects here and press Return.
GH00556D:Enter the vertical distance between replicated objects here and press Return.
GH00556E:Click this button to set the horizontal distance between replicated objects to the width of the original object.
GH00556F:Click this button to set the vertical distance between replicated objects to the height of the original object.

;blend tool infobar
GH002201:Enter the number of intermediate steps to use between the two objects here and press Return.
GH002202:Click this button to increase the amount of intermediate steps between the objects of the blend.
GH002203:click this button ot decrease the amount of intermediate steps between the objects of the blend.
GH002213:Click this button to use a different blending technique. Note this will only work is both the source and destination object has the same number of control points!
GH00220B:Click this button to remove a blend from the selected object.

;text area tool infobar
GH005685:You are in column setup mode. Click this button to enter area setup mode.
GH005681:This is the X co-ordinate of the bottom left corner of the current text area. Enter a number here and press Return to change the X co-ordinate.
GH005682:This is the Y co-ordinate of the bottom left corner of the current text area. Enter a number here and press Return to change the Y co-ordinate.
GH005683:This is the width of the current text area. Enter a number here and press Return to change the width.
GH005684:This is the height of the current text area. Enter a number here and press Return to change the height.
GH0056B5:Select this option to show or hide the current text area's column borders.
GH005686:This is the horizontal distance of columns from text area border. Enter a number here and press Return to change the horizontal distance.
GH005687:This is the vertical distance of columns from text area border. Enter a number here and press Return to change the vertical distance.
GH005689:This is the number of columns in the current text area. Enter a number here and press Return to change the number of columns.
GH00568A:Click this button to increase the number of columns in the current text area.
GH00568B:Click this button to decrease the number of columns in the current text area.
GH00568C:You are in area setup mode. Click this button to enter column setup mode.
GH005688:This is the gap between columns of a text area. Enter a number here and press Return to change the number of columns.
GH0056C6:Click this button to display the text help file for the text area tool.

;text edit tool infobar
GH0056A1:Click this button to enter font mode.
GH005691:Click this button to enter paragraph mode.
GH005692:Click this button to enter text colour mode.
GH005698:Click this button to enter indent mode.
GH00568F:Click this button to apply subscript to the selected text.
GH005690:Click this button to apply superscript to the selected text.
GH005693:This shows the current font begin used. Click here to change the current font.
GH005694:This is the current font size being used. Enter a number here and press Return to change the font size.
GH005695:Click this button to increase the font size.
GH005696:Click this button to decrease the font size.
GH005697:This shows the horizontal font size as a percentage of the vertical font size. Enter a number here and press Return to change the percentage.
GH00569A:Click this button to left align the current paragraph.
GH00569B:Click this button to right align the current paragraph.
GH00569C:Click this button to centre align the current paragraph.
GH00569D:Click this button to fully justify the current paragraph.
GH0056B2:This is the space that must be left in column below paragraph. Enter a number here and press Return to change the space.
GH0056A0:This is the line spacing as a percentage of the font size. Enter a number here and press Return to change the percentage.
GH00569E:This is the amount of additional spacing before each paragraph. Enter a number here and press Return to change the spacing.
GH00569F:This is the amount of additional spacing after each paragraph. Enter a number here and press Return to change the spacing.
GH0056A4:Click here to change the text foreground colour.
GH0056A5:Click here to change the text background colour. This is mainly used for anti-aliasing.
GH0056AF:This is the distance between each tab stop. Enter a number here and press Return to change the distance.
GH005699:This is the indent used for the first line of each paragraph. Enter a number here and press Return to change the first line indent.
GH0056AE:This is the indent used for subsequent lines of a paragraph. Enter a number here and press Return to change the subsequent line indent.

;Text area info
GH0056B6:The number of characters in the current text area (including spaces).
GH0056B7:The number of words in the current text area.
GH0056B8:Click this button to save the contents of the current text area as plain text. Note that all formatting, with the exception of paragraph breaks, will be lost.
GH0056B9:Click this button to close the text area info dialogue box.

;Text area save box
GH0056BA:Drag the icon to a filer window to save the file.
GH0056BB:Enter the name of the file to be saved here.
GH0056BC:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a filer window to save the file.

;text tool infobar
GH001801:This displays the current font being used. Click here to change the current font.
GH001802:This is the current font size. Enter a number here and press REturn to change the font size.
GH001803:Click this button to increase the font size.
GH001804:Click this button to decrease the font size.
GH001805:This is the horizontal font size expressed as a percentage of the vertical font size. Enter a number here and press Return to change the percentage.
GH001806:Click this button to increase the width of the font over the height, making the text wider.
GH001807:Click this button to decrease the width of the font over the height, making the text narrower.
GH001829:Click this button to change options relating to text fitted to a curve.
GH00182A:Click this button to go back to font name and size choices.
GH001825:This shows the distance from the start of a curve to the start of the text on the curve, in EMs (1EM = the font size used). Enter a number here and press Return to change the distance.
GH001826:This shows the distance from the curve to the text fitted to the curve, in EMs (1EM = the font size used). Enter a number here and press Return to change the distance. Use negative numbers to put text underneath the curve.

;crystal tool info bar
GH005981:This shows the current transparency type. Click here to change the current transparency type.
GH00599C:Select this option to make grouped objects have one level of transparency, instead of individual levels of transparency for each object in the group.
GH00599E:Click this button to display the text help file for the transparency tool.
GH005980:Select this option to display transparent objects in this document. Turning this option on may slow redrawing of the document.
GH005982:This is the level of transparency for the selected objects, where 0% is totally opaque and 100% is totally transparent, i.e. invisible. Enter a new transparency percentage here and press Return to set the transparency percentage.
GH00599F:Click this button to apply the changes made to the transparency percentage.
GH005986:Drag this slider to set the level of transparency for the selected objects. A value of 0% means totally opaque and a value of 100% means totally transparent, i.e. invisible.

;translate tool infobar
GH005583:Click this button to make both the horizontal and vertical distance to move equal to one subdivision of the current grid.
GH005581:This is the horizontal distance to move the selected objects by. Enter a number here and press Return to change the horizontal distance.
GH005582:This is the vertical distance to move the selected objects by. Enter a number here and press Return to change the vertical distance.
GH00558D:Click this button to halve the horizontal distance the selected objects will be moved by.
GH00558E:Click this button to halve the vertical distance the selected objects will be moved by.
GH005584:Click this button to move the selected objects the specified distance to the left and up.
GH005585:Click this button to move the selected objects the specified distance upwards.
GH005586:Click this button to move the selected objects the specified distance to the right and up.
GH005587:Click this button to move the selected objects the specified distance to the left.
GH005588:Click this button to move the selected objects the specified distance to the right.
GH005589:Click this button to move the selected objects the specified distance to the left and down.
GH00558A:Click this button to move the selected objects the specified distance downwards.
GH00558B:Click this button to move the selected objects the specified distance to the right and down.

;resizer tool infobar
GH005921:This shows the current width og the object. Enter a number here and press Return to change the width.
GH005922:This shows the height of the selected objects. Enter a number here and press Return to change the height.
GH005923:Select this option to lock the aspect ratio of the selected objects, i.e. when the height or the width changes, the other value will also change accordingly.
GH00592E:Select this option to resize lines together with the object.
GH005924:Click this button to set the origin of the selected objects to its top left corner.
GH005925:Click this button to set the origin of the selected objects to the centre of its top edge.
GH005926:Click this button to set the origin of the selected objects to its top right corner.
GH005927:Click this button to set the origin of the selected objects to the centre of its left edge.
GH005928:Click this button to set the origin of the selected objects to the centre of the object.
GH005929:Click this button to set the origin of the selected objects to the centre of its right edge.
GH00592A:Click this button to set the origin of the selected objects to its bottom left corner.
GH00592B:Click this button to set the origin of the selected objects to the centre of its bottom edge.
GH00592C:Click this button to set the origin of the selected objects to its bottom right corner.

;mover tool infobar
GH005930:This is the X co-ordinate of the selected objects, relative to the page origin. Enter a number here and press Return to change the X co-ordinate.
GH005931:This is the Y co-ordinate of the selected objects, relative to the page origin. Enter a number here and press Return to change the Y co-ordinate.

;zoom tool infobar
GH002100:This is the current zoom level. Enter a number here and press Return to zoom to that level.
GH0055FA:Click this button to increase the zoom level.
GH0055FB:Click this button to decrease the zoom level.
GH0055FD:Click this button to go to the previous zoom level used.
GH0055FE:Click this button to go to the zoom level used before the current one.
GH002102:Click this button to go to the previous zoom level used.
GH002103:Click this button to zoom the current document so that it fills the whole screen mode selected.
GH002104:Click this button to zoom the current document so that it fills the size of the document's window.
GH002108:Click this button to zoom the current document so that every object in the drawing is viewable on screen.
GH002107:Click this button to zoom the current document so that the current selection (if there is one) fills the screen.
GH0055F6:Click this button to go to the first zoom preset. Shift-click this button to save the current zoom level as a preset.
GH0055F7:Click this button to go to the second zoom preset. Shift-click this button to save the current zoom level as a preset.
GH0055F8:Click this button to go to the third zoom preset. Shift-click this button to save the current zoom level as a preset.
GH0055F9:Click this button to go to the fourth zoom preset. Shift-click this button to save the current zoom level as a preset.
GH002109:Click this button to set the zoom level to 25%.
GH00210A:Click this button to set the zoom level to 50%.
GH00210B:Click this button to set the zoom level to 75%.
GH00210C:Click this button to set the zoom level to 100%.
GH00210D:Click this button to set the zoom level to 150%.
GH00210E:Click this button to set the zoom level to 200%.

;mrotate tool infobar
GH0055B1:This shows the angle by which all selected objects will be rotated. Enter a number here and press Return to rotate all the selected objects by that number of degrees.
GH0055BC:Click this button to rotate all the selected objects 90 degrees counter-clockwise.
GH0055BE:Click this button to rotate all the selected objects 180 degrees counter-clockwise.
GH0055BD:Click this button to rotate all the selected objects 90 degrees clockwise.
GH0055B2:Click this button to set the rotation origin of all selected objects to their top left corner.
GH0055B3:Click this button to set the rotation origin of all selected objects to the centre of their top edge.
GH0055B4:Click this button to set the rotation origin of all selected objects to their top right corner.
GH0055B5:Click this button to set the rotation origin of all selected objects to the centre of their left edge.
GH0055B6:Click this button to set the rotation origin of all selected objects to the centre of each object.
GH0055B7:Click this button to set the rotation origin of all selected objects to the centre of their right edge.
GH0055B9:Click this button to set the rotation origin of all selected objects to their bottom left corner.
GH0055B9:Click this button to set the rotation origin of all selected objects to the centre of their bottom edge.
GH0055BA:Click this button to set the rotation origin of all selected objects to their bottom right corner.

;mscale tool infobar
GH0055E1:This is the amount the selected objects will be scaled here. Enter a number here and press Return to scale by that amount. A number bigger than 1 will make the objects bigger, whilst a number smaller than 1 will make the objects smaller.
GH0055E2:This shows the ratio of the width to the height of the object. Enter a number here and press Return to change the ratio when scaling.
GH0055E3:Select this option to scale line widths of all the selected objects as well.
GH0055E4:Select this option to lock the aspect ratio of all objects being scaled.
GH0055E5:Click this button to flip all selected objects around the X-axis of their scaling point.
GH0055E6:Click this button to flip all selected objects around the Y-axis of their scaling point.
GH0055E7:Click this button to set the scaling origin of all selected objects to their top left corner.
GH0055E8:Click this button to set the scaling origin of all selected objects to the centre of their top edge.
GH0055E9:Click this button to set the scaling origin of all selected objects to their top right corner.
GH0055EA:Click this button to set the scaling origin of all selected objects to the centre of their left edge.
GH0055EB:Click this button to set the scaling origin of all selected objects to the centre of each object.
GH0055EC:Click this button to set the scaling origin of all selected objects to the centre of their right edge.
GH0055ED:Click this button to set the scaling origin of all selected objects to their bottom left corner.
GH0055EE:Click this button to set the scaling origin of all selected objects to the centre of their bottom edge.
GH0055EF:Click this button to set the scaling origin of all selected objects to their bottom right corner.

;pathutils tool infobar
GH0055C1:This is the X co-ordinate of the start of the line segment, relative to the page origin. Enter a number here and press Return to change the X co-ordinate.
GH0055C2:This is the Y co-ordinate of the start of the line segment, relative to the page origin. Enter a number here and press Return to change the Y co-ordinate.
GH0055C3:This is the length of the current line segment, in page units. Enter a number here and press Return to change the length.
GH0055C4:This is the angle the selected line segment makes with the horizontal. Enter a number here and press Return to change the angle.

;quickcopy tool infobar
GH00578E:Select this option to copy the selected object to a specified distance horizontally or vertically from the source object.
GH00578F:This is the distance the copied object will be from the source object. Enter a number here and press Return in page units to change that distance.
GH005790:Select this option to set the distance the copied object will be from the source object to the same as the current grid setup.
GH005791:Select this option to only allow copies to be made vertically.
GH005792:Select this option to only allow copies to be made horizontally.
GH005781:Click this button to set the copy origin of the selected object to its top left corner.
GH005782:Click this button to set the copy origin of the selected object to the centre of its top edge.
GH005783:Click this button to set the copy origin of the selected object to its top right corner.
GH005784:Click this button to set the copy origin of the selected object to the centre of its left edge.
GH005785:Click this button to set the copy origin of the selected object to the centre of the object.
GH005786:Click this button to set the copy origin of the selected object to the centre of its right edge.
GH005787:Click this button to set the copy origin of the selected object to its bottom left corner.
GH005788:Click this button to set the copy origin of the selected object to the centre of its bottom edge.
GH005789:Click this button to set the copy origin of the selected object to its bottom right corner.
GH00578B:Click this button to set the copy origin to the bottom left corner of the baseline of a line of text.
GH00578A:Click this button to set the copy origin to the bottom left corner of the baseline of a line of text.

;skew tool info bar
GH001A19:This shows the angle by which an object is skewed. Enter a number here and press Return to skew an object to that angle.
GH001A1A:Select this option to skew an object along the X-axis of the skew origin.
GH001A1B:Select this option to skew an object along the Y-axis of the skew origin,
GH001A03:This is the X co-ordinate of the selection's skew origin, relative to the page origin. Enter a number here and press Return to change the X co-ordinate.
GH001A04:This is the Y co-ordinate of the selection's skew origin, relative to the page origin. Enter a number here and press Return to change the Y co-ordinate.
GH001A06:Click this button to set the skew origin to the top left corner of the selection.
GH001A07:Click this button to set the skew origin to the centre of the top edge of the selection.
GH001A08:Click this button to set the skew origin to the top right corner of the selection.
GH001A09:Click this button to set the skew origin to the centre of the left edge of the selection.
GH001A0A:Click this button to set the skew origin to the centre of the selection.
GH001A0B:Click this button to set the skew origin to the centre of the right edge of the selection.
GH001A0C:Click this button to set the skew origin to the bottom left corner of the selection.
GH001A0D:Click this button to set the skew origin to the centre of the bottom edge of the selection.
GH001A0E:Click this button to set the skew origin to the bottom right corner of the selection.

;info box
GH000000:This field shows the author of the ArtWorks 2 application.
GH000001:This field shows the version number of this copy of ArtWorks 2.

;iconbar menu
GH000100:Move the pointer to the right to see information about this copy of ArtWorks 2
GH000101:Move the pointer to the right to open a new view of a document which is already in memory.
GH000102:Move the pointer to the right to remove a document from memory.
GH000103:Click here to set options applicable to all ArtWorks documents.
GH00024E:Click here to save all options applicable to all ArtWorks documents.
GH000104:Click here to quit ArtWorks.
GH000116:Move the pointer to the right to create a new document based on one of several templates.

;main menu
GH000200:Move the pointer to the right for file options. This leads to options for saving, info, printing and export of the document.
GH000201:Move the pointer to the right for edit options. This leads to the main editing functions like cut/copy/paste, and undo/redo operations.
GH00022E:Move the pointer to the right for object options. This leads to options for editing the selected objects. 
GH000202:Move the pointer to the right for line/shape options. This leads to options for editing lines and shapes.
GH000204:Move the pointer to the right for view options. This leads to options for setting the display quality, grids and separations.
GH000206:Move the pointer to the right for utility options. Utilities are options such as colour editing and control over the ArtWorks tool bars.

;file submenu
GH000207:Move the pointer to the right or click here to show info on the current document.
GH001000:Move the pointer to the right or click here to save the document.
GH000209:Move the pointer to the right to export the document in a variety of formats.
GH00020A:Click here to remove the current document from memory.
GH001F00:Click here to show all bitmaps used in the document. Bitmaps loaded into the document but subsequently deleted are also shown.
GH000D00:Click here to bring up the print dialogue box.
GH00020D:Click here to set options applicable to this document only.

;export submenu
GH005A00:Click here to bring up the SVG export dialogue box.
GH001404:Move te pointer to the right to save the document in a format suitable for the !Draw application.
GH001604:Move the pointer to the right to save the document in ArtWorks EPS format.
GH001605:Move the pointer to the right to save the document in a format suitable for Adobe Illustrator 88.
GH001606:Move the pointer to the right to save the document in a format suitable for Adobe Illustrator 3.0.
GH001607:Move the pointer to the right to save the document in a format suitable for Corel Draw 2.0.
GH001609:Move the pointer to the right to save the document in a format suitable for Corel Draw 3.0.
GH005760:Click here to bring up the bitmap export dialogue box. It allows you to save the document as either a Sprite, GIF or TIFF file.
GH001650:Move the pointer to the right to save the colours of the document as a text file.

;edit submenu
GH000210:Click here to cut the selected objects to the clipboard.
GH000211:Click here to copy the selected objects to the clipboard.
GH000212:Click here to paste the contents of the clipboard to the document.
GH000213:Click here to delete the selected objects.
GH000214:Click here to select all objects in the document.
GH00022F:Click here to duplicate the selected objects. The duplicates will be displayed offset to the bottom and right of the selected objects.
GH0021F:Click here to clone the selected objects. The duplicates will be on top of the selected objects.

;objects submenu
GH001900:Click here to group the selected objects so that they appear as one object.
GH001901:Click here to ungroup a group of objects so that each of the objects in the group is editable.
GH001911:Click here to bring up the alignment dialogue box to align the selected objects.
GH00024F:Click here to make the selected objects snap to the nearest grid point.
GH00024C:Click here to display information about the selected objects.
GH0055A8:Click here to align the base lines of the selected objects.
GH0055A9:Click here to distribute the base lines of the selected objects.
GH0055AA:Click here to snap the base lines of the selected objects to the nearest grid point.
GH0055AC:Move the pointer to the right to choose the packing option for the selected objects.
GH0055AF:Move the pointer to the right to choose the options for centering the selected objects on the page.
GH005700:Click here to bring up the filter dialogue box, to allow for selecting objects based on certain criteria.

;pack objects submenu
GH0055AD:Click here to move the selected objects so that their bounding boxes fit together without overlapping, starting from the left most object.
GH0055AE:Click here to move the selected objects so that their bounding boxes fit together without overlapping, starting from the bottom object.

;centre on page submenu
GH0055A6:Click here to centre the selected objects on the page in the horizontal direction.
GH0055A7:Click here to centre the selected objects on the page in the vertical direction.
GH0055A5:Click here to centre the selected objects on the page in both the horizontal and vertical directions.

;lines/shapes submenu
GH001232:Move the pointer to the right or click here to set the line width of the selected objects.
GH001243:Click here to bring up the line ends dialogue box. This allows editing of the end of lines.
GH001286:Click here to bring up the arrowheads dialogue box. This allows editing of arrowheads on the ends of lines.
GH001225:Click here to bring up the dash pattern dialogue box. This allows editing of the way a line looks.
GH001236:Click here to bring up the join style dialogue box. This allows editing of how line joins and line corners look.
GH001250:Move the pointer to the right to set the winding rule options.
GH00125A:Click here to join the selected objects into one shape.
GH001267:Click here to break apart an object made up of two or more shapes into the original shapes.
GH000220:Click here to make a non-shape object (rectangles, rounded rectangles, ellipses, text lines) into a shape object.
GH0055D0:Click here to intersect all the selected objects. The resulting objects will be where all the selected objects overlap.
GH0055D1:Click here to intersect the selected objects with the object on top of them. The resulting objects will be where each individual object and the top object overlap.
GH001212:Click here to set the selected objects' line width to 0.25 points.
GH001213:Click here to set the selected objects' line width to 0.5 points
GH001214:Click here to set the selected objects' line width to 1 point.
GH001215:Click here to set the selected objects' line width to 1.5 points.
GH001216:Click here to set the selected objects' line width to 2 points.
GH001217:Click here to set the selected objects' line width to 4 points.
GH001218:Click here to set the selected objects' line width to 6 points.
GH001219:Click here to set the selected objects' line width to 8 points.
GH00121A:Click here to set the selected objects' line width to 12 points.

;winding rule submenu
GH00124E:Click here to set the winding rule to non-zero.
GH00124F:Click here to set the winding rule to even-odd.

;view submenu
GH00021C:Click here to open another view of the document.
GH000250:Move the pointer to the right to set the display quality of the document.
GH00021B:Move the pointer to the right to show or hide the colour separations of the document.
GH000904:Move the pointer to the right or click here to bring up the grid dialogue box. This allows the changing of rectangular grid parameters.
GH000D2F:Click here to show or hide the print border. This shows the area outside of which printing will not be possible, taking into account the printer driver paper size.
GH0057D0:Click here to bring up the extra grids dialogue box. This allows the setting of isometric grids.
GH0055A0:Click here to show or hide the window showing the X and Y co-ordinates of the pointer.
GH000257:Click here to show or hide the page rulers.

;wysiwyg submenu
GH000251:Click here to set the display quality to the highest possible.
GH000252:Click here to set the display quality to as high as possible without anti-aliasing.
GH000253:Click here to set the display quality to only show simple objects.
GH000254:Click here to set the display quality to only show the outlines of all objects.

;separation submenu
GH00021B:Click here to display the indicated colour separation of the document.

;utilities submenu
GH00021D:Click here to bring up the colour editor dialogue box, to create a new colour.
GH00021E:Click here to bring up the colour editor dialogue box, to edit an existing colour.
GH000221:Click here to show or hide the toolbox.
GH000222:Click here to show or hide the info bar.
GH000223:Click here to show or hide keyboard shortcuts in menus.
GH001816:Click here to fit the selected line of text to the selected curve or line.
GH001817:Click here to remove a line of text from the selected curve or line.
GH005900:Click here to show or hide the colour bar.
GH005905:Click here to either attach the colour bar to the document, or make it free floating. Move the pointer to the right for more options.

;attach colour bar submenu
GH005906:Click here to attach the colour bar to the top of a document's window.
GH005907:Click here to attach the colour bar to the bottom of a document's window.

;Sprite pool main menu
GH001100:Move the pointer to the right to change the way the document Sprites are displayed and arranged.
GH001101:Move the pointer to the right to change option for the selected Sprite.
GH001102:Click here to select all the Sprites in the Sprite pool.
GH001103:Click here to clear the selection of Sprites.
GH001104:Move the pointer to the right to save the Sprite pool as a Sprite file.

;display submenu
GH001106:Click here to display the Sprites using large icons.
GH001107:Click here to display the Sprites using small icons.
GH001108:Click here to display the Sprites with all their information.
GH001109:Click here to display the Sprites using ArtWorks' colours.
GH00110A:Click here to display the Sprites using the desktop palette.

;Sprite submenu
GH00110B:Move the pointer to the right to display information on the selected Sprite.
GH00110C:Move the pointer to save the selected Sprite in a Sprite file of its own.
GH00110D:Move the pointer to the right to give the selected Sprite another name.
GH00110E:Move the pointer to the right to copy the selected Sprite with a different name.
GH00110F:Click here to remove the selected Sprite from the document Sprite pool permanently.

;Sprite pool save window
GH001C00:Drag this icon to a Filer window to save the file.
GH001C01:Enter the name of the file to be saved here.
GH001C02:If there is a directory path present in the filename box, clicking this button will save the file. Otherwise drag the file icon to a directory display to save the file.

;pattern-fill
GH005630:Click here to show user defined hatch styles.
GH00562F:Click here to edit the user defined hatch style.
GH005631:Click here to update the user defined hatch style with the current one, overwriting the old one.

;transparency type menu
GH00598F:Click here to clear the transparency of the selected objects.
GH005990:Click here to set the transparency type of the selected objects to mix transparency.
GH005991:Click here to set the transparency type of the selected objects to stained glass transparency.
GH005992:Click here to set the transparency type of the selected objects to bleach transparency.

;quality menu in BMExport.
GH0057A5:Click here to set the export quality of the bitmap to the highest possible.
GH0057A6:Click here to set the export quality of the bitmap to the highest possible with anti-aliasing turned off.
GH0057A7:Click here to set the export quality of the bitmap so that only simple shapes are exported.
GH0057A8:Click here to set the export quality of the bitmap to only export the outlines of all objects.

;operator menu in filter dialogue box
GH00573D:Click here to set the operator for filtering to less than.
GH00573E:Click here to set the operator for filtering to less than or equal to.
GH00573F:Click here to set the operator for filtering to equal to.
GH005740:Click here to set the operator for filtering to greater or equal to.
GH005741:Click here to set the operator for filtering to greater than.

;extra grids grid type menu
GH0057E3:Click here to select a rectangular grid.
GH0057E4:Click here to select an isometric grid.
GH0057E5:Click here to select a circular grid.

;Print setup tool info bar
GH005B01:This is the horizontal distance the print area will be moved from the bottom left corner of the page. Enter a number here in page units and press Return to change the distance.
GH005B02:This is the vertical distance the print area will be moved from the the bottom left corner of the page. Enter a number in page units and press Return to change the distance.
GH005B05:Click this button to reset the horizontal and vertical distance to their default values.

;Ruler origin dialogue box
GH000258:Select this option to set the ruler origin relative to current selection.
GH000259:Select this option to set the ruler origin relative to the page area.
GH00025A:Click this button to set the ruler origin to the top left corner of the current page or selection.
GH00025B:Click this button to set the ruler origin to the middle of the top edge of the current page or selection.
GH00025C:Click this button to set the ruler origin to the top right corner of the current page or selection.
GH00025D:Click this button to set the ruler origin to the middle of the left edge of the current page or selection.
GH00025E:Click this button to set the ruler origin to the centre of the current page or selection.
GH00025F:Click this button to set the ruler origin to the middle of the right edge of the current page or selection.
GH000260:Click this button to set the ruler origin to the bottom left corner of the current page or selection.
GH000261:Click this button to set the ruler origin to the middle of the bottom edge of the current page or selection.
GH000262:Click this button to set the ruler origin to the bottom right corner of the current page or selection.
